Zhao Yan Ru, Xie Qiang, Wang Gui Lin, Zhang Yong Jian, Zhang Yong Xing, Su Wenjun
Faculty of Civil Engineering, Chongqing University, Area B (B Campus), No.174, Shapingba District, Chongqing, China.
Environ Sci Pollut Res Int. 2014 Nov;21(22):12605-15. doi: 10.1007/s11356-014-3183-2. Epub 2014 Jun 24.
The aim of this study is to analyze the effect of biodegradation on the shear strength of municipal solid waste (MSW), leachate, and biogas production. The direct shear (DS) test shows that the shear strength of waste in the initial stages is mainly depended on its composition and inter-structure. After the waste has been in a landfill for 30 days, the waste's increased biodegradation exhibited a great influence on the waste's shear strength. The increase of moisture content in the waste mass might cause a decrease of its shear strength. Tri-axial tests under consolidation-drained (CD) condition show that the shear strength of the cohesion and friction angle for degraded samples increased when the defined axial strain increased from 5 to 20 %. The cohesion varied from 35.90 to 66.42 kPa and the drained friction angle ranged between 29° and 38°. The measurements of shear strength properties are utilized to assess the slope stability of landfills.
本研究的目的是分析生物降解对城市固体废物(MSW)抗剪强度、渗滤液及沼气产生的影响。直剪(DS)试验表明,废物初始阶段的抗剪强度主要取决于其组成和内部结构。废物在填埋场放置30天后,其生物降解程度的增加对废物的抗剪强度产生了很大影响。废物堆中水分含量的增加可能会导致其抗剪强度降低。固结排水(CD)条件下的三轴试验表明,当规定轴向应变从5%增加到20%时,降解样品的黏聚力和摩擦角抗剪强度增加。黏聚力在35.90至66.42kPa之间变化,排水摩擦角在29°至38°之间。抗剪强度特性的测量用于评估填埋场的边坡稳定性。