Lallbeeharry P, Tian Y, Fu N, Wu W D, Woo M W, Selomulya C, Chen X D
School of Chemical and Environmental Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou City, Jiangsu 215123, China; Department of Chemical Engineering, Monash University, Clayton, Victoria 3800, Australia.
School of Chemical and Environmental Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou City, Jiangsu 215123, China.
J Dairy Sci. 2014 Sep;97(9):5303-14. doi: 10.3168/jds.2013-7772. Epub 2014 Jul 3.
Mixing surfactants with whole milk feed before spray drying could be a commercially favorable approach to produce instant whole milk powders in a single step. Pure whole milk powders obtained directly from spray drying often have a high surface fat coverage (up to 98%), rendering them less stable during storage and less wettable upon reconstitution. Dairy industries often coat these powders with lecithin, a food-grade surfactant, in a secondary fluidized-bed drying stage to produce instant powders. This study investigated the changes in wetting behavior on the surface of a whole milk particle caused by the addition of surfactants before drying. Fresh whole milk was mixed with 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin (total solids), and the wetting behavior of the shell formed by each sample was captured using a single-droplet drying device at intermediate drying stages as the shell was forming. The addition of surfactants improved shell wettability from the beginning of shell formation, producing more wettable milk particles after drying. The increase in surfactant loading by 10 times reduced the wetting time from around 30s to <5s. At the same loading of 1% (wt/wt; total solids), milk particles with Tween 80 were much more wettable than those with lecithin (<5s compared with >30s). We proposed that Tween 80 could adsorb at the oil-water interface of fat globules, making the surface fat more wettable, whereas lecithin tends to combine with milk proteins to form a complex, which then competes for the air-water surface with fat globules. Spray-drying experiments confirmed the greatly improved wettability of whole milk powders by the addition of either 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin; wetting time was reduced from 35±4s to <15s. To the best of our knowledge, this is the first time that a dynamic droplet drying system has been used to elucidate the complex interactions between ionic or nonionic surfactants and milk components (both proteins and fat), as well as the resultant effect on the development of milk particle functionality during drying.
在喷雾干燥前将表面活性剂与全脂牛奶进料混合,可能是一种在一步操作中生产速溶全脂奶粉的商业上可行的方法。直接通过喷雾干燥获得的纯全脂奶粉通常具有较高的表面脂肪覆盖率(高达98%),这使得它们在储存期间稳定性较差,并且在复水时润湿性较低。乳制品行业通常在二级流化床干燥阶段用食品级表面活性剂卵磷脂对这些粉末进行包衣,以生产速溶粉末。本研究调查了干燥前添加表面活性剂对全脂牛奶颗粒表面润湿性的影响。将新鲜全脂牛奶与0.1%(重量/重量)吐温80或1%(重量/重量)卵磷脂(总固体)混合,并在中间干燥阶段使用单滴干燥装置在壳形成时捕获每个样品形成的壳的润湿性。从壳形成开始,表面活性剂的添加就改善了壳的润湿性,干燥后产生了润湿性更强的牛奶颗粒。表面活性剂负载量增加10倍,润湿性时间从约30秒减少到<5秒。在相同的1%(重量/重量;总固体)负载量下,含有吐温80的牛奶颗粒比含有卵磷脂的牛奶颗粒润湿性更强(<5秒对比>30秒)。我们认为吐温80可以吸附在脂肪球的油水界面上,使表面脂肪更具润湿性,而卵磷脂倾向于与牛奶蛋白结合形成复合物,然后与脂肪球争夺气水表面。喷雾干燥实验证实,添加0.1%(重量/重量)吐温80或1%(重量/重量)卵磷脂可大大提高全脂奶粉的润湿性;润湿性时间从35±4秒减少到<15秒。据我们所知,这是首次使用动态液滴干燥系统来阐明离子型或非离子型表面活性剂与牛奶成分(蛋白质和脂肪)之间的复杂相互作用以及在干燥过程中对牛奶颗粒功能发展的最终影响。