Xu Hongbo, Wu Yun, Wang Jian, Shang Xuewei, Jiang Xiaojun
College of Chemical Engineering, University of Science and Technology Liaoning, Anshan 114051, China.
J Environ Sci (China). 2013 Dec;25 Suppl 1:S45-9. doi: 10.1016/S1001-0742(14)60624-0.
A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.
已开发出一种利用预处理硅胶作为吸附剂的新方法,用于在火焰原子吸收光谱法测量之前同时预富集痕量镉(II)和铅(II)。研究了pH值、振荡时间、洗脱条件和共存离子对分析物分离/预富集条件的影响。在优化条件下,镉(II)和铅(II)的静态吸附容量分别为45.5和27.1mg/g,相对标准偏差分别为3.2%和1.7%(n = 11),获得的检测限分别为4.25和0.60 ng/mL。通过分析有证标准物质GBW 07304a(河流沉积物)对该方法进行了验证,并成功应用于各种处理后废水样品的分析,结果令人满意。