Department of Ophthalmology, Ophthalmic Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran.
Br J Ophthalmol. 2014 Nov;98(11):1597-600. doi: 10.1136/bjophthalmol-2014-304868. Epub 2014 Jul 30.
To introduce a modification to big-bubble deep anterior lamellar keratoplasty (DALK) which can decrease the risk of Descemet membrane (DM) perforation during air injection.
In Anwar's big-bubble technique, a 27-guage needle is inserted from the trephination site and advanced into the corneal stroma up to the centre. The technique we introduce modifies the original technique in the following fashion. After trephination to approximately 80% of corneal thickness, a 27-guage needle is inserted into the stroma peripherally from the trephination site towards the limbus. Air is injected gently into the deep stroma until a big bubble is formed. This technique was performed in 16 consecutive keratoconic eyes undergoing DALK. Additionally, peripheral air injection was carried out in 27 eye-bank corneas using a peripheral approach.
In all (100%) eye-bank and 13 (81.3%) live corneas, a successful big bubble was easily achieved following peripheral air injection. In these 13 live corneas, all bubbles were formed at the central (n=10) or paracentral (n=3) cornea and extended centrifugally (type 1 bubble). In one of these corneas, an additional three bubbles were noted in the periphery between the DM and the pre-Descemet posterior stromal layer (Dua's layer, type 2) after a type 1 bubble was formed. In two live corneas in which peripheral air injection failed, a big bubble was successfully formed after air was injected inside the trephination site.
Air injection peripheral to the trephination site is a reproducible modification to the standard technique which can decrease the risk of DM perforation during air injection.
介绍一种改良的大泡深层前板层角膜移植术(DALK),可降低注气过程中穿透Descemet 膜(DM)的风险。
在 Anwar 的大泡技术中,27 号针头从环钻部位插入,向角膜基质中央推进。我们介绍的技术对原技术进行了如下改良。环钻至角膜厚度的 80%左右后,27 号针头从环钻部位向角膜缘周边插入基质内。轻轻向深层基质内注入空气,直至形成大泡。该技术在 16 例连续行 DALK 的圆锥角膜眼中进行。另外,使用周边入路在 27 例眼库角膜中进行了周边注气。
在所有(100%)眼库和 13 例(81.3%)活供体角膜中,周边注气后均能轻松获得成功的大泡。在这 13 例活供体角膜中,所有的泡均形成于中央(n=10)或旁中央(n=3)角膜,离心扩展(1 型泡)。在其中 1 例角膜中,在形成 1 型泡后,在 DM 和前 Descemet 后基质层(Dua 层,2 型)之间的周边部位又观察到另外 3 个泡。在 2 例活供体角膜中,虽然周边注气失败,但在环钻部位内注气后仍成功形成了大泡。
环钻部位周边的注气是对标准技术的可重复改良,可降低注气过程中穿透 DM 的风险。