Department of Structural Engineering, Tongji University, Shanghai 200092, PR China.
Department of Structural Engineering, Tongji University, Shanghai 200092, PR China.
Waste Manag. 2014 Nov;34(11):2327-34. doi: 10.1016/j.wasman.2014.07.029. Epub 2014 Aug 24.
One methodology is proposed to estimate the quantification and composition of building-related construction and demolition (C&D) waste in a fast developing region like Shanghai, PR China. The varieties of structure types and building waste intensities due to the requirement of progressive building design and structure codes in different decades are considered in this regional C&D waste estimation study. It is concluded that approximately 13.71 million tons of C&D waste was generated in 2012 in Shanghai, of which more than 80% of this C&D waste was concrete, bricks and blocks. Analysis from this study can be applied to facilitate C&D waste governors and researchers the duty of formulating precise policies and specifications. As a matter of fact, at least a half of the enormous amount of C&D waste could be recycled if implementing proper recycling technologies and measures. The appropriate managements would be economically and environmentally beneficial to Shanghai where the per capita per year output of C&D waste has been as high as 842 kg in 2010.
提出了一种方法来估算中国上海这样快速发展地区的与建筑物有关的建筑和拆除(C&D)废物的量化和组成。在这个区域的 C&D 废物估算研究中,考虑了由于不同十年的渐进式建筑设计和结构规范的要求而导致的结构类型和建筑废物强度的多样性。研究结果表明,2012 年上海产生了约 1371 万吨 C&D 废物,其中超过 80%的 C&D 废物是混凝土、砖块和砌块。本研究的分析结果可用于为 C&D 废物管理者和研究人员制定精确政策和规范提供便利。事实上,如果实施适当的回收技术和措施,那么大量的 C&D 废物中至少有一半可以回收利用。对于上海这样的城市来说,适当的管理将在经济和环境方面带来好处,因为上海的人均每年 C&D 废物产量在 2010 年已经高达 842 公斤。