Suppr超能文献

将焚烧后的污水污泥灰作为CaO-Al2O3-SiO2-P2O5微晶玻璃生产的原料进行回收利用。

The recycling of incinerated sewage sludge ash as a raw material for CaO-Al2O3-SiO2-P2O5 glass-ceramic production.

作者信息

Zhang Zhikun, Zhang Lei, Yin Yulei, Liang Xuanye, Li Aimin

机构信息

a Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology , Dalian University of Technology , Linggong Road 2, Dalian 116024 , People's Republic of China.

出版信息

Environ Technol. 2015 May-Jun;36(9-12):1098-103. doi: 10.1080/09593330.2014.982208. Epub 2014 Nov 25.

Abstract

In this paper, the recycling of incinerated sewage sludge ash (ISSA) into glass-ceramic materials by a two-stage sintering cycle of nucleation stage and crystallization stage without any pressure and binder is presented. The parent glasses were subjected to the following nucleation/crystallization temperature and time level: (A) 790°C, 1.0 h/870°C, 1.0-3.0 h; (B) 790°C, 1.0 h/945°C, 1.0-3.0 h and (C) 790°C, 1.0 h/1065°C, 1.0-3.0 h. X-ray power diffraction analysis results revealed that multiple crystalline phases coexisted in the glass-ceramic materials and the crystalline phase compositions were more affected by crystallization temperature than crystallization time. Scanning electron microscopy analysis showed an interlocking microstructure of glass phases and crystals with different sizes and spatial distribution. The glass-ceramics crystallized at 945°C for 2.0 h exhibited optimal properties of density of 2.88±0.08 g/cm3, compression strength of 247±12 MPa, bending strength of 118±14 MPa and water absorption of 0.42±0.04. The leaching concentrations of heavy metals were far lower than the limits required by the regulatory standard of EPA. This paper provides a feasible, low-cost and promising method to produce ISSA-based glass-ceramics and highlights the principal characteristics that must be taken into account to use ISSA correctly in glass-ceramics.

摘要

本文介绍了在无任何压力和粘结剂的情况下,通过成核阶段和结晶阶段的两阶段烧结循环将焚烧后的污水污泥灰(ISSA)回收制成微晶玻璃材料。母玻璃经历了以下成核/结晶温度和时间水平:(A)790°C,1.0小时/870°C,1.0 - 3.0小时;(B)790°C,1.0小时/945°C,1.0 - 3.0小时和(C)790°C,1.0小时/1065°C,1.0 - 3.0小时。X射线粉末衍射分析结果表明,微晶玻璃材料中存在多种晶相共存,且晶相组成受结晶温度的影响大于结晶时间。扫描电子显微镜分析显示,玻璃相和晶体具有不同尺寸和空间分布的联锁微观结构。在945°C下结晶2.0小时的微晶玻璃表现出最佳性能,密度为2.88±0.08 g/cm³,抗压强度为247±12 MPa,抗弯强度为118±14 MPa,吸水率为0.42±0.04。重金属的浸出浓度远低于美国环境保护局监管标准要求的限值。本文提供了一种可行、低成本且有前景的方法来生产基于ISSA的微晶玻璃,并突出了在微晶玻璃中正确使用ISSA时必须考虑的主要特性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验