Smith Beth A, Carlson-Kuhta Patricia, Horak Fay B
Division of Biokinesiology and Physical Therapy, University of Southern California, 1540 Alcazar Street, CHP 155, Los Angeles, CA, 90089-9006, USA.
Balance Disorders Laboratory, Department of Neurology, Oregon Health & Science University, Portland, OR, USA.
Physiother Res Int. 2016 Mar;21(1):36-46. doi: 10.1002/pri.1615. Epub 2014 Nov 28.
The backward push and release test (PRT) is a standardized clinical test of postural responses elicited by perturbations. Our goal was to determine reliability of administration and response. This will inform clinical administration and determine whether to develop an instrumented version.
One examiner administered 10 backward PRT trials to adults with Parkinson disease (12), multiple sclerosis (14) and controls (12). We used three-dimensional motion analysis, force plates and instrumented gloves to measure administration and response. Administration variables were angle of posterior trunk lean and the distance of the centre of mass (CoM) behind the ankle. Postural response variables were latency of postural response from release to step initiation and first compensatory step length. Reliability was measured using the range of variables across trials, comparison of first and later trials, intraclass correlations (ICCs) to measure consistency and correlations between administration and response.
There was inherent variability in administration, which affected postural response characteristics. Larger trunk angle and greater CoM-ankle distance were correlated with shorter postural response latencies and larger step lengths. Participant height also had an effect; taller participants had larger trunk angles prior to release resulting in longer latencies and larger step lengths. Using ICCs, consistency of trunk angle was likely acceptable and CoM-ankle distance was high. Consistency of latency was low, while step length was likely acceptable.
Despite variability in administration and inconsistency in response, different postural response characteristics were detected between patients with different disease states. Based on these results, we will create algorithms to instrument the PRT using inertial movement sensors to collect more sensitive measures of postural responses than observational clinical rating scales. Feedback for appropriate lean angle and calibration for participant height will improve consistency and usefulness of the instrumented PRT. Copyright © 2014 John Wiley & Sons, Ltd.
后推释放试验(PRT)是一种用于评估由扰动引发的姿势反应的标准化临床测试。我们的目标是确定该测试实施过程及反应的可靠性。这将为临床应用提供参考,并决定是否开发一种仪器化版本。
一名检查者对患有帕金森病的成年人(12名)、多发性硬化症患者(14名)和对照组(12名)进行了10次后推PRT试验。我们使用三维运动分析、测力板和仪器化手套来测量测试实施过程及反应。测试实施变量包括后躯干倾斜角度和质心(CoM)在脚踝后方的距离。姿势反应变量包括从释放到开始迈步的姿势反应潜伏期和第一个补偿步长。通过试验中变量的范围、首次与后续试验的比较、组内相关系数(ICC)来测量一致性以及测试实施过程与反应之间的相关性,以此评估可靠性。
测试实施过程中存在内在变异性,这影响了姿势反应特征。更大的躯干角度和更大的CoM - 脚踝距离与更短的姿势反应潜伏期和更大的步长相关。参与者的身高也有影响;较高的参与者在释放前有更大的躯干角度,导致更长的潜伏期和更大的步长。使用ICC分析,躯干角度的一致性可能可以接受,而CoM - 脚踝距离的一致性较高。潜伏期的一致性较低,而步长的一致性可能可以接受。
尽管测试实施过程存在变异性且反应存在不一致性,但在不同疾病状态的患者之间检测到了不同的姿势反应特征。基于这些结果,我们将创建算法,利用惯性运动传感器对PRT进行仪器化,以收集比观察性临床评分量表更敏感的姿势反应测量数据。针对适当倾斜角度的反馈以及对参与者身高的校准将提高仪器化PRT的一致性和实用性。版权所有© 2014约翰威立父子有限公司。