Smiga-Matuszowicz Monika, Janicki Bartosz, Jaszcz Katarzyna, Łukaszczyk Jan, Kaczmarek Marcin, Lesiak Marta, Sieroń Aleksander L, Simka Wojciech, Mierzwiński Maciej, Kusz Damian
Silesian University of Technology, Department of Physical Chemistry and Technology of Polymers, M. Strzody Street 9, 44-100 Gliwice, Poland.
Silesian University of Technology, Department of Physical Chemistry and Technology of Polymers, M. Strzody Street 9, 44-100 Gliwice, Poland.
Mater Sci Eng C Mater Biol Appl. 2014 Dec;45:64-71. doi: 10.1016/j.msec.2014.08.069. Epub 2014 Sep 6.
In this study new biodegradable materials obtained by crosslinking poly(3-allyloxy-1,2-propylene succinate) (PSAGE) with oligo(isosorbide maleate) (OMIS) and small amount of methyl methacrylate were investigated. The porous scaffolds were obtained in the presence of a foaming system consisted of calcium carbonate/carboxylic acid mixture, creating in situ porous structure during crosslinking of liquid formulations. The maximum crosslinking temperature and setting time, the cured porous materials morphology as well as the effect of their porosity on mechanical properties and hydrolytic degradation process were evaluated. It was found that the kind of carboxylic acid used in the foaming system influenced compressive strength and compressive modulus of porous scaffolds. The MTS cytotoxicity assay was carried out for OMIS using hFOB1.19 cell line. OMIS resin was found to be non-toxic in wide range of concentrations. On the ground of scanning electron microscopy (SEM) observations and energy X-ray dispersive analysis (EDX) it was found that hydroxyapatite (HA) formation at the scaffolds surfaces within short period of soaking in phosphate buffer solution occurs. After 3h immersion a compact layer of HA was observed at the surface of the samples. The obtained results suggest potential applicability of resulted new porous crosslinked polymeric materials as temporary bone void fillers.
在本研究中,对通过将聚(3-烯丙氧基-1,2-丙二醇琥珀酸酯)(PSAGE)与低聚(异山梨醇马来酸酯)(OMIS)以及少量甲基丙烯酸甲酯交联而获得的新型可生物降解材料进行了研究。多孔支架是在由碳酸钙/羧酸混合物组成的发泡体系存在下获得的,在液体制剂交联过程中形成原位多孔结构。评估了最大交联温度和凝固时间、固化多孔材料的形态以及它们的孔隙率对力学性能和水解降解过程的影响。发现发泡体系中使用的羧酸种类会影响多孔支架的抗压强度和抗压模量。使用hFOB1.19细胞系对OMIS进行了MTS细胞毒性试验。发现OMIS树脂在很宽的浓度范围内无毒。基于扫描电子显微镜(SEM)观察和能量X射线色散分析(EDX),发现在磷酸盐缓冲溶液中短时间浸泡后,支架表面会形成羟基磷灰石(HA)。浸泡3小时后,在样品表面观察到一层致密的HA层。所得结果表明,所得新型多孔交联聚合物材料作为临时骨缺损填充材料具有潜在的适用性。