Androulaki Krystalenia, Chrissopoulou Kiriaki, Prevosto Daniele, Labardi Massimiliano, Anastasiadis Spiros H
†Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, 711 10 Heraklion Crete, Greece.
‡Department of Chemistry, University of Crete, 710 03 Heraklion Crete, Greece.
ACS Appl Mater Interfaces. 2015 Jun 17;7(23):12387-98. doi: 10.1021/am507571y. Epub 2015 Jan 20.
The effect of severe confinement on the dynamics of three different generations of hyperbranched polyesters of the Boltorn family is investigated by dielectric relaxation spectroscopy (DRS). The polymer chains are intercalated within the galleries of natural montmorillonite (Na+-MMT), thus forming 1 nm polymer films confined between solid walls. The structure of the nanocomposites is studied with X-ray diffraction and the thermal behavior of the polymers in bulk and under confinement is determined by differential scanning calorimetry. The glass transition temperatures of the polymers show a clear dependence on the generation whereas the transition is completely suppressed when all the polymer chains are intercalated. The dynamic investigation of the bulk polymers reveals two sub-Tg processes, with similar behavior for the three polymers with the segmental relaxation observed above the Tg of each polymer. For the nanocomposites, where all the polymer chains are severely confined, the dynamics show significant differences compared to that of the bulk polymers. The sub-Tg processes are similar for the three generations but significantly faster and with weaker temperature dependence than those in the bulk. The segmental process appears at temperatures below the bulk polymer Tg, it exhibits an Arrhenius temperature dependence and shows differences for the three generations. A slow process that appears at higher temperatures is due to interfacial polarization.
通过介电弛豫光谱法(DRS)研究了严重受限条件对Boltorn家族三代不同超支化聚酯动力学的影响。聚合物链插层在天然蒙脱石(Na+-MMT)的层间,从而形成限制在固体壁之间的1nm聚合物薄膜。用X射线衍射研究了纳米复合材料的结构,并用差示扫描量热法测定了聚合物在本体和受限条件下的热行为。聚合物的玻璃化转变温度明显依赖于代数,而当所有聚合物链都插层时,转变被完全抑制。本体聚合物的动力学研究揭示了两个低于玻璃化转变温度的过程,三种聚合物表现出相似的行为,在每种聚合物的玻璃化转变温度以上观察到链段弛豫。对于纳米复合材料,所有聚合物链都受到严重限制,其动力学与本体聚合物相比有显著差异。三代纳米复合材料低于玻璃化转变温度的过程相似,但比本体聚合物中的过程快得多且温度依赖性较弱。链段过程出现在低于本体聚合物玻璃化转变温度的温度下,表现出阿仑尼乌斯温度依赖性,且三代之间存在差异。在较高温度下出现的一个缓慢过程是由于界面极化。