Eriksson Andersson Annika K, Selbach Sverre M, Grande Tor, Knee Christopher S
Department of Materials Science and Engineering, Norwegian University of Science and Technology, NO-7491 Trondheim, Norway.
Dalton Trans. 2015 Jun 21;44(23):10834-46. doi: 10.1039/c4dt03948c. Epub 2015 Mar 25.
The crystal structure of the proton conducting perovskite BaCe(0.8)Y(0.2)O(3-δ) (BCY20) has been studied via high-resolution in situ neutron diffraction performed in controlled dry and humid (heavy water) oxygen flow. Two phase transitions, cubic Pm3[combining macron]m→R3[combining macron]c (775 °C)→Imma (250 °C) were observed on cooling from 1000 °C in dry O(2). A significant shift of the phase stability fields was observed on cooling in wet oxygen (pD(2)O ≈ 0.2 atm) with the R3[combining macron]c structure stabilised at 900 °C, and the R3[combining macron]c→Imma transition occurring at 675 °C. On cooling below 400 °C a monoclinic, I2/m, phase started to appear. The structural dependence on hydration level is primarily due to the de-stabilisation of the correlated, octahedra tilts as a consequence of structural relaxation around the oxygen vacancies present in the non-hydrated phase. The tendency of hydrated BaCe(0.8)Y(0.2)O(3-δ) to show octahedral tilting is also found to be enhanced, indicating that the deuteronic (protonic) defects influence the crystal structure, possibly via hydrogen bonding. Stabilisation of the monoclinic I2/m phase is attributed to the structural effect of deuterons that is inferred to increase on cooling as deuterons localise to a greater extent. Changing from wet oxidising (O(2) + D2O(g)) to wet reducing (5% H2 in Ar + D2O(g)) atmosphere did not influence the structure or the phase stability, indicating that Ce(4+) was not reduced under the present conditions. Based on the observed cell volume expansion protonic defects are present in the material at 900 °C at a D(2)O partial pressure of ∼0.2 atm. The origin of the chemical expansion is explained by the effective size of the oxygen vacancy being significantly smaller than the [OD] defect. Rietveld analysis has been used to locate possible sites for the deuterons in the high temperature, R3[combining macron]c and Imma, phases that are most relevant for proton transport.
通过在可控的干燥和潮湿(重水)氧气流中进行的高分辨率原位中子衍射研究了质子传导钙钛矿BaCe(0.8)Y(0.2)O(3-δ)(BCY20)的晶体结构。在干燥O₂中从1000℃冷却时,观察到两个相变,立方Pm3[macron]m→R3[macron]c(775℃)→Imma(250℃)。在湿氧(pD₂O≈0.2 atm)中冷却时,观察到相稳定性场有显著变化,R3[macron]c结构在900℃稳定,R3[macron]c→Imma转变在675℃发生。在冷却至400℃以下时,单斜I2/m相开始出现。结构对水合水平的依赖性主要是由于非水合相中存在的氧空位周围的结构弛豫导致相关八面体倾斜失稳。还发现水合BaCe(0.8)Y(0.2)O(3-δ)显示八面体倾斜的趋势增强,表明氘(质子)缺陷可能通过氢键影响晶体结构。单斜I2/m相的稳定归因于氘核的结构效应,据推测随着氘核在更大程度上局部化,这种效应在冷却时会增加。从湿氧化(O₂ + D₂O(g))气氛转变为湿还原(Ar中5% H₂ + D₂O(g))气氛不会影响结构或相稳定性,表明在当前条件下Ce(4+)未被还原。基于观察到的晶胞体积膨胀,在900℃、D₂O分压约为0.2 atm时材料中存在质子缺陷。化学膨胀的起源可以通过氧空位的有效尺寸明显小于[OD]缺陷来解释。Rietveld分析已用于确定高温下R3[macron]c和Imma相中与质子传输最相关的氘核可能位置。