Zhao J X, Su X Y, Zhao Z, Zhang L C, Zhang L H, Tang P F
Department of Orthopaedics, Chinese PLA General Hospital, Beijing, 100853.
Beijing Da Xue Xue Bao Yi Xue Ban. 2015 Apr 18;47(2):263-8.
To establish a reliable approach for measuring proximal femoral 3 dimensional anatomy, and to compare post-operative differences of proximal femoralanatomy in the inter-trochanter fractures with two kinds of antegrade nailings.
Some computer assisted design (CAD) softwares, e.g. Mimics, were used to establish a reliable approach for measuring proximal femoral 3 dimensional (3D) anatomy. Intra-class correlation coefficient (ICC) was used to test the reliability of intra- and inter-observers. The post-operative pelvic CT data of 19 cases of inter-trochanter fracture patients treated with InterTAN nailing and 21 cases of inter-trochanter fracture patients treated with proximal femoral nail anti-rotation (PFNA) were retrospectively analysed and used to measure bilateral proximal femoral anatomical parameters, including 2D and 3D femoral neck-shaft (NS) angle and femoral neck anteversion (NA) angle, and 2D and 3D anteversion angles of the intramedullary (IM) nailings. ICC was used to test the consistency of the NA angles in the different groups, and the paired student T-test was used to test the differences of the paired quantitative data.
The established measurement method hasdexcellent consistency within the intra- and inter-observers, with all the ICCs higher than 0.9. The paired student T-test showed no significant difference between the post-operative bilateral 2D or 3D NA angles. The ICCs results showed that there were no consistency between the post-operative bilateral 2D or 3D NA angles (P values were 0.099 and 0.055, respectively), but the excellent consistency between the 2D injured side NA angle and 2D IM nailing's NA angle, or between the 3D injured side NA angle and 3D IM nailing's NA angle (the ICCs were 0.81 and 0.8, respectively, P values < 0.001). In PFNA group, 57% of the differences between the 2D post-operative injured side's and intact side's NA angles were higher than 15°, which was more than 15.78% in InterTAN group. The paired student T-test showed no significant difference between the post-operative injured side's 2D or 3D NS angles and the intact side's respective 2D or 3D angles in PFNA group (P values were 0.925 and 0.367, respectively), but in InterTAN group, the post-operative injured side's 2D or 3D NS angles were significantly smaller than the intact side's respective angles (P values were 0.033 and 0.009, respectively).
By analyzing and comparing bilateral proximal femoral anatomical parameters after two kinds of IM nailings procedures, the differences between the bilateral post-operative NA angles in PFNA group were significantly larger than those in InterTAN group. There was significant correlation between the NA angles of the injured sides and NA angles of IM nailings in both the groups.
建立一种可靠的测量股骨近端三维解剖结构的方法,并比较两种顺行髓内钉治疗转子间骨折后股骨近端解剖结构的术后差异。
使用一些计算机辅助设计(CAD)软件,如Mimics,建立一种可靠的测量股骨近端三维(3D)解剖结构的方法。组内相关系数(ICC)用于检验观察者内和观察者间的可靠性。回顾性分析19例采用InterTAN髓内钉治疗的转子间骨折患者和21例采用股骨近端抗旋髓内钉(PFNA)治疗的转子间骨折患者的术后骨盆CT数据,用于测量双侧股骨近端解剖参数,包括二维和三维股骨颈干(NS)角和股骨颈前倾角(NA),以及髓内(IM)钉的二维和三维前倾角。ICC用于检验不同组间NA角的一致性,配对学生t检验用于检验配对定量数据的差异。
所建立的测量方法在观察者内和观察者间具有良好的一致性,所有ICC均高于0.9。配对学生t检验显示术后双侧二维或三维NA角之间无显著差异。ICC结果显示术后双侧二维或三维NA角之间无一致性(P值分别为0.099和0.055),但二维患侧NA角与二维IM钉NA角之间,或三维患侧NA角与三维IM钉NA角之间具有良好的一致性(ICC分别为0.81和0.8,P值<0.001)。在PFNA组中,术后二维患侧与健侧NA角差异的57%高于15°,在InterTAN组中这一比例超过了15.78%。配对学生t检验显示PFNA组术后患侧二维或三维NS角与健侧相应的二维或三维角之间无显著差异(P值分别为0.925和0.367),但在InterTAN组中,术后患侧二维或三维NS角显著小于健侧相应角度(P值分别为0.033和0.009)。
通过分析和比较两种IM钉固定术后双侧股骨近端解剖参数,PFNA组术后双侧NA角的差异显著大于InterTAN组。两组中患侧NA角与IM钉NA角之间均存在显著相关性。