Combined photocatalysis and membrane bioreactor for the treatment of feedwater containing thin film transistor-liquid crystal display discharge.

The nitrogen content of waste water generated by the thin film transistor-liquid crystal display (TFT-LCD) industry is not satisfactorily removed through the conventional aerobic-activated sludge process. In this study, the performance of three reactors – suspended type TiO2 membrane photoreactor (MPR), anoxic/oxic membrane bioreactor (AOMBR), and their combination (MPR-AOMBR) – was evaluated using feedwater containing TFT-LCD discharge. The parameters that maximized monoethanolamine (MEA) removal in the MPR were continuous ultraviolet (UV) irradiation and pH 11. Among the tested loadings, 0.1 g/l of TiO2 promoted MEA removal but degradation rate may further increase with photocatalyst concentration. The nitrified sludge recycle ratio R of the AOMBR was adjusted to 1.5 to minimize the amount of nitrate in the effluent. The AOMBR greatly decreased chemical oxygen demand and MEA, but removed only 32.7% of tetramethyl ammonium hydroxide (TMAH). The MPR was configured as the pre-treatment unit for AOMBR, and the combined MPR-AOMBR has improved TMAH removal by 80.1%. The MPR bolstered performance by decomposing slowly biodegradable compounds, and had no negative effects on denitrification and carbon removal.