Qin Sisi, Clark Richard A F, Rafailovich Miriam H
Materials Sciences and Engineering Department, Stony Brook University, Stony Brook, NY, USA.
Department of Materials Science and Engineering, Stony Brook University, Stony Brook, NY, USA.
Acta Biomater. 2015 Oct;25:230-9. doi: 10.1016/j.actbio.2015.06.030. Epub 2015 Jun 24.
Wound healing proceeds via fibroblast migration along three dimensional fibrillar substrates with multiple angles between fibers. We have developed a technique for preparation of three dimensional fibrillar scaffolds with where the fiber diameters and the angles between adjacent fiber layers could be precisely controlled. Using the agarose droplet method we were able to make accurate determinations of the dependence of the migration speed, focal adhesion distribution, and nuclear deformation on the fiber diameter, fiber spacing, and angle between adjacent fiber layers. We found that on oriented single fiber layers, whose diameters exceeded 1 μm, large focal adhesion complexes formed in a linear arrangement along the fiber axis and cell motion was highly correlated. On multi layered scaffolds most of the focal adhesion sites reformed at the junction points and the migration speed was determined by the angle between adjacent fiber layers, which followed a parabolic function with a minimum at 30°. On these surfaces we observed a 25% increase in the number of focal adhesion points and a similar decrease in the degree of nuclear deformation, both phenomena associated with decreased mobility. These results underscore the importance of substrate morphology on the en-mass migration dynamics.
En-mass fibroblast migration is an essential component of the wound healing process which can determine rate and scar formation. Yet, most publications on this topic have focused on single cell functions. Here we describe a new apparatus where we designed three dimensional fibrillar scaffolds with well controlled angles between junction points and highly oriented fiber geometries. We show that the motion of fibroblasts undergoing en-mass migration on these scaffolds can be controlled by the substrate topography. Significant differences in cell morphology and focal adhesions was found to exist between cells migrating on flat versus fibrillar scaffolds where the migration speed was found to be a function of the angle between fibers, the fiber diameter, and the distance between fibers.
伤口愈合是通过成纤维细胞沿着三维纤维状基质迁移实现的,纤维之间存在多个角度。我们开发了一种制备三维纤维支架的技术,其中纤维直径和相邻纤维层之间的角度可以精确控制。使用琼脂糖滴法,我们能够准确测定迁移速度、粘着斑分布和核变形对纤维直径、纤维间距以及相邻纤维层之间角度的依赖性。我们发现,在直径超过1μm的定向单纤维层上,大型粘着斑复合物沿纤维轴呈线性排列形成,细胞运动高度相关。在多层支架上,大多数粘着斑位点在连接点处重新形成,迁移速度由相邻纤维层之间的角度决定,该角度遵循抛物线函数,在30°时达到最小值。在这些表面上,我们观察到粘着斑点数增加了25%,核变形程度也有类似程度的降低,这两种现象都与迁移率降低有关。这些结果强调了基质形态对整体迁移动力学的重要性。
成纤维细胞整体迁移是伤口愈合过程的重要组成部分,可决定愈合速度和瘢痕形成。然而,关于该主题的大多数出版物都集中在单细胞功能上。在此,我们描述了一种新装置,我们设计了三维纤维支架,其连接点之间的角度和纤维几何形状高度定向且可控。我们表明,在这些支架上进行整体迁移的成纤维细胞的运动可以由基质地形控制。发现在平坦支架与纤维支架上迁移的细胞之间,细胞形态和粘着斑存在显著差异,其中迁移速度是纤维之间角度、纤维直径和纤维间距的函数。