Suppr超能文献

幂律特性介质中剪切模量的估计。

Estimation of shear modulus in media with power law characteristics.

作者信息

Zhang Wei, Holm Sverre

机构信息

Department of Informatics, University of Oslo, P.O. Box 1080, NO-0316 Oslo, Norway.

出版信息

Ultrasonics. 2016 Jan;64:170-6. doi: 10.1016/j.ultras.2015.09.003. Epub 2015 Sep 9.

Abstract

Shear wave propagation in tissue generated by the radiation force is usually modeled by either a lossless or a classical viscoelastic equation. However, experimental data shows power law behavior which is not consistent with those approaches. It is well known that fractional derivatives results in power laws, therefore a time fractional wave equation, the Caputo equation, which can be derived from the fractional Kelvin-Voigt stress and strain relation is tested. This equation is solved using the finite difference method with experimental parameters obtained from the existing literature. The equation is characterized by a fractional order which is also the power law exponent of the frequency dependent shear modulus. It is shown that for fractional order between 0 and 1, the equation gives smaller shear modulus than the classical model. The opposite situation applies for fractional order greater than 1. The numerical simulation also shows that the shear wave velocity method is only reliable for small losses. In our case, this is only for a small fractional order. Based on the published values of fractional order from other studies, there is therefore a chance for biased estimation of the shear modulus.

摘要

由辐射力在组织中产生的剪切波传播通常用无损或经典粘弹性方程来建模。然而,实验数据显示出幂律行为,这与那些方法不一致。众所周知,分数阶导数会导致幂律,因此测试了一个时间分数阶波动方程,即卡普托方程,它可以从分数阶开尔文 - 沃伊特应力应变关系推导得出。该方程使用有限差分法求解,实验参数取自现有文献。该方程的特征在于一个分数阶,它也是频率相关剪切模量的幂律指数。结果表明,对于0到1之间的分数阶,该方程给出的剪切模量比经典模型小。分数阶大于1时情况相反。数值模拟还表明,剪切波速度方法仅在小损耗情况下可靠。在我们的案例中,这仅适用于小分数阶。基于其他研究发表的分数阶值,因此存在对剪切模量进行有偏差估计的可能性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验