Suppr超能文献

使用氩气团簇离子时有机材料混合物的溅射产额

Sputtering Yields for Mixtures of Organic Materials Using Argon Gas Cluster Ions.

作者信息

Seah M P, Havelund R, Shard A G, Gilmore I S

机构信息

Analytical Science Division, National Physical Laboratory , Teddington, Middlesex TW11 0LW, United Kingdom.

出版信息

J Phys Chem B. 2015 Oct 22;119(42):13433-9. doi: 10.1021/acs.jpcb.5b06713. Epub 2015 Oct 8.

Abstract

The sputtering yield volumes of binary mixtures of Irganox 1010 with either Irganox 1098 or Fmoc-pentafluoro-L-phenylalanine (FMOC) have been measured for 5 keV Ar2000(+) ions incident at 45° to the surface normal. The sputtering yields are determined from the doses to sputter through various compositions of 100 nm thick, intimately mixed, layers. Because of matrix effects, the profiles for secondary ions are distorted, and profile shifts in depth of 15 nm are observed leading to errors above 20% in the deduced sputtering yield. Secondary ions are selected to avoid this. The sputtering yield volumes for the mixtures are shown to be lower than those deduced from a linear interpolation from the pure materials. This is shown to be consistent with a simple model involving the changing energy absorbed for the sputtering of intimate mixtures. Evidence to support this comes from the secondary ion data for pairs of the different molecules. Both binary mixtures behave similarly, but matrix effects are stronger for the Irganox 1010/FMOC system.

摘要

已测量了5 keV的Ar2000(+)离子以相对于表面法线45°的角度入射时,Irganox 1010与Irganox 1098或芴甲氧羰基-五氟-L-苯丙氨酸(FMOC)的二元混合物的溅射产额体积。溅射产额是通过溅射穿过各种由100 nm厚的紧密混合层组成的剂量来确定的。由于基体效应,二次离子的轮廓会发生畸变,并且观察到深度上有15 nm的轮廓偏移,这导致推导的溅射产额误差超过20%。因此选择二次离子以避免这种情况。混合物的溅射产额体积显示低于从纯材料线性插值推导得到的值。这表明与一个涉及紧密混合物溅射时吸收能量变化的简单模型一致。支持这一点的证据来自不同分子对的二次离子数据。两种二元混合物表现相似,但Irganox 1010/FMOC体系的基体效应更强。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验