Hong Chi Rac, Park Sung Joon, Choi Seung Jun
Department of Food Science and Technology, Seoul National University of Science and Technology, Seoul, 01811, Korea.
Department of Interdisciplinary Bio IT Materials, Seoul National University of Science and Technology, Seoul, 01811, Korea.
J Sci Food Agric. 2016 Jul;96(9):3227-32. doi: 10.1002/jsfa.7505. Epub 2015 Dec 18.
Surfactant-made micelles can control the rate of chemical degradation of poorly water-soluble food flavors. To evaluate how the molecular structure of surfactant has an influence on the chemical decomposition rate of citral, micelles were prepared with polyoxyethylene alkyl ether-type surfactants that had similar molecular structures but various hydrophilic head sizes and hydrophobic tail lengths.
At a critical 20× micelle concentration of surfactant, there was no significant difference in the chemical degradation rate of citral in micelles in neutral pH, regardless of the hydrophilic head size or hydrophobic tail length. In an acidic environment, the degradation rate constant of citral generally increased proportionally with increasing hydrophilic head size of surfactant (0.1563 and 0.2217 for surfactants with 23 and 100 oxyethylene units, respectively) but the length of hydrophobic tail did not affect the citral stability. Also, little difference (0.2217 and 0.2265 for surfactant having 100 oxyethylene units with and without Fe(3+) ) in degradation rate constant of citral between simple micellar solution and micellar solution containing iron suggested that iron ions could not accelerate citral degradation in micelles, regardless of the form of iron (Fe(2+) and Fe(3+) ).
This work concludes that although the concentration of surfactant could be relevant, if its concentration could be controlled in the same manner as the critical micelle concentration, then a polyethylene alkyl ether-type surfactant with a small hydrophilic head could more efficiently stabilize citral at an acidic pH. © 2015 Society of Chemical Industry.
由表面活性剂制成的胶束可以控制水溶性差的食用香料的化学降解速率。为了评估表面活性剂的分子结构如何影响柠檬醛的化学分解速率,使用具有相似分子结构但不同亲水头部大小和疏水尾部长度的聚氧乙烯烷基醚型表面活性剂制备了胶束。
在表面活性剂临界胶束浓度为20倍时,无论亲水头部大小或疏水尾部长度如何,中性pH条件下胶束中柠檬醛的化学降解速率均无显著差异。在酸性环境中,柠檬醛的降解速率常数通常随着表面活性剂亲水头部大小的增加而成比例增加(分别含有23和100个氧乙烯单元的表面活性剂,其降解速率常数分别为0.1563和0.2217),但疏水尾部的长度不影响柠檬醛的稳定性。此外,简单胶束溶液和含铁胶束溶液中柠檬醛的降解速率常数差异不大(含有100个氧乙烯单元的表面活性剂,在有和没有Fe(3+) 时,降解速率常数分别为0.2217和0.2265),这表明无论铁的形式是Fe(2+) 还是Fe(3+),铁离子都不能加速胶束中柠檬醛的降解。
这项工作得出的结论是,尽管表面活性剂的浓度可能相关,但如果其浓度能够以与临界胶束浓度相同的方式进行控制,那么具有小亲水头部的聚氧乙烯烷基醚型表面活性剂在酸性pH条件下能更有效地稳定柠檬醛。© 2015化学工业协会。