Suppr超能文献

评估建筑工程产生的PM10和PM2.5颗粒对周边地区的长期影响。

Assessment of the long-term impacts of PM10 and PM2.5 particles from construction works on surrounding areas.

作者信息

Azarmi Farhad, Kumar Prashant, Marsh Daniel, Fuller Gary

机构信息

Department of Civil and Environmental Engineering, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford GU2 7XH, UK.

MRC PHE Centre for Environment and Health, King's College London, London SE1 9NH, UK.

出版信息

Environ Sci Process Impacts. 2016 Feb;18(2):208-21. doi: 10.1039/c5em00549c.

Abstract

Construction activities are common across cities; however, the studies assessing their contribution to airborne PM10 (≤10 μm) and PM2.5 (≤2.5 μm) particles on the surrounding air quality are limited. Herein, we assessed the impact of PM10 and PM2.5 arising from construction works in and around London. Measurements were carried out at 17 different monitoring stations around three construction sites between January 2002 and December 2013. Tapered element oscillating microbalance (TEOM 1400) and OSIRIS (2315) particle monitors were used to measure the PM10 and PM2.5 fractions in the 0.1-10 μm size range along with the ambient meteorological data. The data was analysed using bivariate concentration polar plots and k-means clustering techniques. Daily mean concentrations of PM10 were found to exceed the European Union target limit value of 50 μg m(-3) at 11 monitoring stations but remained within the allowable 35 exceedences per year, except at two monitoring stations. In general, construction works were found to influence the downwind concentrations of PM10 relatively more than PM2.5. Splitting of the data between working (0800-1800 h; local time) and non-working (1800-0800 h) periods showed about 2.2-fold higher concentrations of PM10 during working hours when compared with non-working hours. However, these observations did not allow to conclude that this increase was from the construction site emissions. Together, the polar concentration plots and the k-means cluster analysis applied to a pair of monitoring stations across the construction sites (i.e. one in upwind and the other in downwind) confirmed the contribution of construction sources on the measured concentrations. Furthermore, pairing the monitoring stations downwind of the construction sites showed a logarithmic decrease (with R(2) about 0.9) in the PM10 and PM2.5 concentration with distance. Our findings clearly indicate an impact of construction activities on the nearby downwind areas and a need for developing mitigation measures to limit their escape from the construction sites.

摘要

建筑活动在各个城市都很常见;然而,评估其对周围空气质量中空气传播的PM10(≤10微米)和PM2.5(≤2.5微米)颗粒贡献的研究却很有限。在此,我们评估了伦敦市内及周边建筑工程产生的PM10和PM2.5的影响。在2002年1月至2013年12月期间,于三个建筑工地周围的17个不同监测站进行了测量。使用锥形元件振荡微天平(TEOM 1400)和OSIRIS(2315)颗粒监测仪来测量0.1 - 10微米粒径范围内的PM10和PM2.5组分以及环境气象数据。使用双变量浓度极坐标图和k均值聚类技术对数据进行了分析。发现11个监测站的PM10日均浓度超过了欧盟50微克/立方米的目标限值,但除两个监测站外,每年仍在允许的35次超标范围内。总体而言,发现建筑工程对下风向PM10浓度的影响相对大于对PM2.5浓度的影响。将数据按工作时段(当地时间08:00 - 18:00)和非工作时段(18:00 - 08:00)进行划分,结果显示工作时段的PM10浓度比非工作时段高出约2.2倍。然而,这些观察结果无法得出这一增加是来自建筑工地排放的结论。综合来看,应用于建筑工地两侧一对监测站(即一个在上风向,另一个在下风向)的极坐标浓度图和k均值聚类分析证实了建筑源对测量浓度的贡献。此外,将建筑工地下风向的监测站配对显示,PM10和PM2.5浓度随距离呈对数下降(R²约为0.9)。我们的研究结果清楚地表明了建筑活动对附近下风向区域的影响,以及制定缓解措施以限制其从建筑工地逸出的必要性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验