Sadli M, Machin G, Anhalt K, Bourson F, Briaudeau S, del Campo D, Diril A, Kozlova O, Lowe D H, Mantilla Amor J M, Martin M J, McEvoy H C, Ojanen-Saloranta M, Pehlivan Ö, Rougié B, Salim S G R
High Temperature Metrology Department, Laboratoire Commun de Métrologie, LNE-Cnam, 61 rue du Landy, St Denis 93210, France
Engineering Measurement Division, National Physical Laboratory (NPL), Hampton Road, Teddington TW11 0LW, UK.
Philos Trans A Math Phys Eng Sci. 2016 Mar 28;374(2064):20150043. doi: 10.1098/rsta.2015.0043.
The mise-en-pratique for the definition of the kelvin at high temperatures will formally allow dissemination of thermodynamic temperature either directly or mediated through high-temperature fixed points (HTFPs). In this paper, these two distinct dissemination methods are evaluated, namely source-based and detector-based. This was achieved by performing two distinct dissemination trials: one based on HTFPs, the other based on absolutely calibrated radiation thermometers or filter radiometers. These trials involved six national metrology institutes in Europe in the frame of the European Metrology Research Programme joint project 'Implementing the new kelvin' (InK). The results have shown that both dissemination routes are possible, with similar standard uncertainties of 1-2 K, over the range 1273-2773 K, showing that, depending on the facilities available in the laboratory, it will soon be possible to disseminate thermodynamic temperatures above 1273 K to users by either of the two methods with uncertainties comparable to the current temperature scale.