Chang Yun-Young, Kim Su-Hwan, Park Keun-Oh, Yun Jeong-Ho
Int J Oral Maxillofac Implants. 2016 May-Jun;31(3):611-20. doi: 10.11607/jomi.4260.
The purpose of this study was to evaluate a reverse-tapered design on the osseointegration of narrow-diameter implants in comparison with a conventional tapered design in beagle dogs.
All mandibular premolars and first molars were extracted bilaterally in four beagle dogs. Three months later, three kinds of implants were placed in both quadrants of the mandible: tapered narrow-diameter implants processed by cold working (TNC; n = 8), reverse-tapered narrow-diameter implants (RTN; n = 8), and reverse-tapered narrow-diameter implants processed by cold working (RTNC; n = 8). The animals were sacrificed at 4 weeks. Implant stability quotient (ISQ) values were measured at the time of implant placement and sacrifice. Histomorphometric analysis was performed.
The baseline ISQ values were significantly lower in the RTN (56.0 ± 11.6) and RTNC (57.2 ± 9.8) than in the TNC (68.0 ± 5.4; P = .021). At 4 weeks, the TNC (69.9 ± 5.1) exhibited significantly higher ISQ values compared with the RTNC (61.6 ± 4.1; P = .024). Histologic analysis in the RTN and RTNC revealed osseointegration without any signs of inflammation; however, unresolved coronal gap or dehiscence was also observed. The total bone-to-implant contact ratios (BIC) in TNC, RTN, and RTNC were 55.1% ± 11.5%, 47.8% ± 19.1%, and 60.2% ± 15.3%, respectively, and no significant differences were shown among them. The BIC for the coronal part in each group was 51.1% ± 29.4%, 28.8% ± 33.8%, and 23.9% ± 23.3%, respectively, and the differences were not significant. In the threaded part, TNC, RTN, and RTNC showed a BIC of 56.3% ± 9.6%, 50.7% ± 18.3%, and 65.3% ± 15.6%, respectively. There was no significant difference among them.
The reverse-tapered design on narrow-diameter implants showed a lower initial stability than the conventional tapered design; however, there was equivalent osseointegration in an early healing phase.
本研究旨在对比比格犬中,逆向锥形设计与传统锥形设计的窄直径种植体在骨结合方面的效果。
对4只比格犬双侧下颌前磨牙和第一磨牙进行拔除。3个月后,在下颌两侧象限植入三种种植体:冷加工处理的锥形窄直径种植体(TNC;n = 8)、逆向锥形窄直径种植体(RTN;n = 8)以及冷加工处理的逆向锥形窄直径种植体(RTNC;n = 8)。在4周时处死动物。在种植体植入时和处死时测量种植体稳定性商数(ISQ)值。进行组织形态计量学分析。
RTN组(56.0 ± 11.6)和RTNC组(57.2 ± 9.8)的基线ISQ值显著低于TNC组(68.0 ± 5.4;P = .021)。在4周时,TNC组(69.9 ± 5.1)的ISQ值显著高于RTNC组(61.6 ± 4.1;P = .024)。RTN组和RTNC组的组织学分析显示有骨结合,无任何炎症迹象;然而,也观察到未解决的冠部间隙或裂开。TNC组、RTN组和RTNC组的总骨-种植体接触率(BIC)分别为55.1% ± 11.5%、47.8% ± 19.1%和60.2% ± 15.3%,组间无显著差异。每组冠部的BIC分别为51.1% ± 29.4%、28.8% ± 33.8%和23.9% ± 23.3%,差异不显著。在螺纹部分,TNC组、RTN组和RTNC组的BIC分别为56.3% ± 9.6%、50.7% ± 18.3%和65.3% ±