CAS Key Laboratory of Soft Matter Chemistry, Hefei National Laboratory for Physical Sciences at the Microscale, iChem (Collaborative Innovation Center of Chemistry for Energy Materials), Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, China.
CAS Key Laboratory of Soft Matter Chemistry, Hefei National Laboratory for Physical Sciences at the Microscale, iChem (Collaborative Innovation Center of Chemistry for Energy Materials), Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, China.
J Control Release. 2017 Aug 10;259:149-159. doi: 10.1016/j.jconrel.2016.11.007. Epub 2016 Nov 16.
Hydrogels have found promising applications in drug delivery due to their biocompatibility, high drug loading capability, and tunable release profiles. However, hydrogel-based carriers are primarily employed for delivering hydrophilic payloads while hydrophobic drugs cannot be efficiently delivered due to the lack of hydrophobic domains within conventional hydrogel matrices. Herein, we report that thermo- and photo-responsive hydrogels could be constructed from amphiphilic triblock copolymers, poly(N-isopropylacrylamide)-b-poly(4-acryloylmorpholine)-b-poly(2-((((2-nitrobenzyl)oxy)carbonyl) amino)ethyl methacrylate) (PNIPAM-b-PNAM-b-PNBOC), and the resulting hydrogels could be further engineered a new carrier for both hydrophilic gemcitabine (GCT) and hydrophobic doxorubicin (DOX). PNIPAM-b-PNAM-b-PNBOC triblock copolymers were first self-assembled into micelles with hydrophobic photosensitive PNBOC cores, hydrophilic PNAM inner shells, and thermoresponsive PNIPAM coronas below the lower critical solution temperature (LCST), while hydrogels of physically cross-linked micellar nanoparticles were achieved at elevated polymer concentrations and high temperatures above the critical gelation temperature (CGT). Rheological experiments revealed that the CGT was highly dependent on polymer compositions and concentrations, that is, a longer hydrophobic PNBOC block or a higher polymer concentration led to a decreased CGT. However, the CGT prior to UV irradiation (CGT) could be drastically elevated after UV irradiation (CGT) as a result of UV irradiation-induced concurrently cross-linking and hydrophobic-to-hydrophilic transition within PNBOC cores. As such, gel-to-sol transition could be accomplished by either temperature decrease or exposure to UV irradiation at a fixed temperature lower than the CGT. Note that both GCT and DOX could be simultaneously encapsulated into the hydrogels due to the coexistence of extramicellar aqueous phase and hydrophobic micellar cores. Intriguingly, the subsequent co-release of GCT and DOX could be regulated by taking advantage of either temperature or UV irradiation-mediated gel-to-sol transitions.
水凝胶由于其生物相容性、高药物负载能力和可调节的释放特性,在药物传递中有着有前途的应用。然而,水凝胶载体主要用于传递亲水性有效载荷,而由于传统水凝胶基质中缺乏疏水区,疏水性药物不能得到有效传递。在此,我们报告说,两亲性三嵌段共聚物聚(N-异丙基丙烯酰胺)-b-聚(4-丙烯酰吗啉)-b-聚(2-(((2-硝基苄基)氧基)羰基)氨基)乙基甲基丙烯酸酯(PNIPAM-b-PNAM-b-PNBOC)可以构建温敏和光响应水凝胶,并且所得水凝胶可以进一步设计成新的载体,用于传递亲水性吉西他滨(GCT)和疏水性阿霉素(DOX)。PNIPAM-b-PNAM-b-PNBOC 三嵌段共聚物首先自组装成具有疏水性光敏感 PNBOC 核、亲水性 PNAM 内层和低于低临界溶液温度(LCST)的温敏 PNIPAM 冠状物的胶束,而在升高的聚合物浓度和高于临界凝胶化温度(CGT)的高温下,实现了物理交联胶束纳米颗粒水凝胶。流变学实验表明,CGT 高度依赖于聚合物组成和浓度,即较长的疏水性 PNBOC 嵌段或更高的聚合物浓度会导致 CGT 降低。然而,在 UV 照射后(CGT),CGT 可以大大升高,这是由于 UV 照射诱导 PNBOC 核内同时交联和疏水性向亲水性的转变。因此,通过温度降低或在低于 CGT 的固定温度下暴露于 UV 照射,可以实现凝胶到溶胶的转变。请注意,由于存在胶束外水相和疏水性胶束核,GCT 和 DOX 可以同时包封在水凝胶中。有趣的是,通过利用温度或 UV 照射介导的凝胶到溶胶转变,可以调节 GCT 和 DOX 的随后共释放。