DeWald D B, Pearson J D
Biotechnology Research, Upjohn Company, Kalamazoo, Michigan 49001.
Anal Biochem. 1989 Aug 1;180(2):340-8. doi: 10.1016/0003-2697(89)90442-9.
This report presents a technique for recovery of mouse forebrain proteins from two-dimensional sodium dodecyl sulfate-polyacrylamide gels for subsequent primary structure determination. Proteins were visualized by Coomassie staining or salt precipitation and manually cut out of the gel. Excised spots were minced and loaded into an empty precolumn of a reversed-phase high-performance liquid chromatography system. Purified protein was extruded from a gel matrix by pressurized liquid, then separated from gel contaminants by reversed-phase gradient elution, and finally collected in siliconized tubes or on polybrene-coated filter disks for gas-phase sequencing. Several mouse and rat forebrain proteins were purified by this method and sequenced. Three previously unidentified mouse brain proteins with molecular weights of 4,000, 12,000, and 18,500 were partially sequenced and three hemoglobin fragments were structurally identified and mapped. Ribonuclease A, myoglobin, adrenocorticotropin, and bovine somatotropin were also subjected to two-dimensional (2-D) analysis and partially sequenced. Recovery values of 27-95% were obtained for extruded 14C-labeled ribonuclease, carbonic anhydrase, and bovine serum albumin out of sodium dodecyl sulfate-polyacrylamide gel electrophoretic gels. Losses resulting from the multiple handling steps of a 2-D gel separation process were also investigated. Recoveries of 12-17%, as determined by sequencing signals, were achieved. These latter recovery values reflect overall losses incurred in gel-focusing, gel-sizing, staining, destaining, high-pressure liquid extrusion, and N-terminal blockage. This work demonstrates that an array of protein spots can be systematically identified or defined by partial sequencing after high-pressure liquid extrusion from a 2-D gel matrix.(ABSTRACT TRUNCATED AT 250 WORDS)
本报告介绍了一种从二维十二烷基硫酸钠-聚丙烯酰胺凝胶中回收小鼠前脑蛋白质的技术,用于后续的一级结构测定。通过考马斯亮蓝染色或盐沉淀使蛋白质可视化,然后手动从凝胶中切出。将切下的斑点切碎并装入反相高效液相色谱系统的空预柱中。通过加压液体将纯化的蛋白质从凝胶基质中挤出,然后通过反相梯度洗脱与凝胶污染物分离,最后收集在硅化管中或涂有聚凝胺的滤盘上用于气相测序。用这种方法纯化并测序了几种小鼠和大鼠前脑蛋白质。对三种分子量分别为4000、12000和18500的先前未鉴定的小鼠脑蛋白质进行了部分测序,并对三个血红蛋白片段进行了结构鉴定和定位。核糖核酸酶A、肌红蛋白、促肾上腺皮质激素和牛生长激素也进行了二维分析并部分测序。从十二烷基硫酸钠-聚丙烯酰胺凝胶电泳凝胶中挤出的14C标记的核糖核酸酶、碳酸酐酶和牛血清白蛋白的回收率为27%-95%。还研究了二维凝胶分离过程中多个操作步骤导致的损失。通过测序信号测定,回收率为12%-17%。这些回收率反映了在凝胶聚焦、凝胶大小调整、染色、脱色、高压液体挤出和N端封闭过程中产生的总体损失。这项工作表明,从二维凝胶基质中高压液体挤出后,通过部分测序可以系统地鉴定或定义一系列蛋白质斑点。(摘要截短至250字)