Position and orientation measurement adopting camera calibrated by projection geometry of Plücker matrices of three-dimensional lines.

A position and orientation measurement method is investigated by adopting a camera calibrated by the projection geometry of the skew-symmetric Plücker matrices of 3D lines. The relationship between the Plücker matrices of the dual 3D lines and the 2D projective lines is provided in two vertical world coordinate planes. The transform matrix is generated from the projections of the 3D lines. The differences between the coordinates of the reprojective lines and the coordinates of extracted lines are employed to verify the calibration validity. Moreover, the differences between the standard movement distance of the target and the measurement distance are also presented to compare the calibration accuracy of the 3D line to 2D line method and the point-based method. Furthermore, we also explore the noise immunity of the two methods by adding Gaussian noises. Finally, an example to measure the position and orientation of a cart is performed as an application case of this method. The results are tabled for the reproduction by the readers. The results demonstrate that the line to line method contributes higher calibration accuracy and better noise immunity. The position and orientation measurement adopting the line to line method is valid for the future applications.