Chen Xin, Shu Jiapei, Chen Qing
Key Laboratory for Ultrafine Materials of Ministry of Education and Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China.
State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, 865 Changning Road, Shanghai 200050, China.
Sci Rep. 2017 Apr 24;7:46680. doi: 10.1038/srep46680.
Gas-liquid-solid phase transition behaviour of water is studied with environmental scanning electron microscopy for the first time. Abnormal phenomena are observed. At a fixed pressure of 450 Pa, with the temperature set to -7 °C, direct desublimation happens, and ice grows continuously along the substrate surface. At 550 Pa, although ice is the stable phase according to the phase diagram, metastable liquid droplets first nucleate and grow to ~100-200 μm sizes. Ice crystals nucleate within the large sized droplets, grow up and fill up the droplets. Later, the ice crystals grow continuously through desublimation. At 600 Pa, the metastable liquid grows quickly, with some ice nuclei floating in it, and the liquid-solid coexistence state exists for a long time. By lowering the vapour pressure and/or increasing the substrate temperature, ice sublimates into vapour phase, and especially, the remaining ice forms a porous structure due to preferential sublimation in the concave regions, which can be explained with surface tension effect. Interestingly, although it should be forbidden for ice to transform into liquid phase when the temperature is well below 0 °C, liquid like droplets form during the ice sublimation process, which is attributed to the surface tension effect and the quasiliquid layers.
首次利用环境扫描电子显微镜研究了水的气-液-固相变行为。观察到了异常现象。在450 Pa的固定压力下,将温度设定为-7°C时,会发生直接凝华,冰沿基底表面持续生长。在550 Pa时,尽管根据相图冰是稳定相,但亚稳态液滴首先形核并生长到约100 - 200μm大小。冰晶在大尺寸液滴内形核、长大并充满液滴。随后,冰晶通过凝华持续生长。在600 Pa时,亚稳态液体快速生长,其中有一些冰核漂浮,液-固共存状态持续较长时间。通过降低蒸气压和/或提高基底温度,冰升华为气相,特别是剩余的冰由于在凹形区域优先升华而形成多孔结构,这可以用表面张力效应来解释。有趣的是,尽管当温度远低于0°C时冰应禁止转变为液相,但在冰升华过程中会形成类似液滴的物质,这归因于表面张力效应和准液层。