Key Laboratory of Theoretical and Computational Photochemistry, Ministry of Education, College of Chemistry, Beijing Normal University , Beijing 100875, China.
J Chem Theory Comput. 2017 Jun 13;13(6):2717-2729. doi: 10.1021/acs.jctc.7b00153. Epub 2017 May 4.
In the present work, the quantum trajectory mean-field (QTMF) approach is numerically implemented by ab initio calculation at the level of the complete active space self-consistent field, which is used to simulate photoisomerization of acetylacetone at ∼265 nm. The simulated results shed light on the possible nonadiabatic pathways from the S state and mechanism of the photoisomerization. The in-plane proton transfer and the subsequent S → S transition through the E-S/S-1 intersection region is the predominant route to the S state. Meanwhile, rotational isomerization occurs in the S state, which is followed by internal conversion to the S state in the vicinity of the E-S/S-2 conical intersection. As a minor pathway, the direct S → S → S transition can take place via the E-S/S/S three-state intersection region. The rotamerization in the S state was determined to be the key step for formation of nonchelated enolic isomers. The final formation yield is predicted to be 0.57 within the simulated period. The time constant for the S proton transfer was experimentally inferred to be ∼70.0 fs in the gas phase and ∼50.0 fs in dioxane, acetonitrile, and n-hexane, which is well-reproduced by the present QTMF simulation. The S lifetime of 2.11 ps simulated here is in excellent agreement with the experimentally inferred values of 2.12, 2.13, and 2.25 ps in n-hexane, acetonitrile, and dioxane, respectively. The present study provides clear evidence that a direct ab initio QTMF approach is a reliable tool for simulating multiple-state nonadiabatic dynamics processes.
在本工作中,通过从头算至完全活性空间自洽场水平实现了量子轨线平均场(QTMF)方法,用于模拟约 265nm 处的乙酰丙酮光致异构化。模拟结果揭示了 S 态的可能非绝热途径和光致异构化的机制。面内质子转移和随后通过 E-S/S-1 交叉区域的 S→S 跃迁是通向 S 态的主要途径。同时,在 S 态中发生旋转异构化,随后在 E-S/S-2 双锥交叉附近通过内转换回到 S 态。作为次要途径,直接 S→S→S 跃迁可以通过 E-S/S/S 三态交叉区域发生。S 态中的构象异构化被确定为形成非螯合烯醇异构体的关键步骤。在模拟期间,预测最终形成产率为 0.57。实验推断 S 质子转移的时间常数在气相中约为 70.0fs,在二氧六环、乙腈和正己烷中约为 50.0fs,这很好地被本 QTMF 模拟所重现。这里模拟的 S 寿命为 2.11ps,与在正己烷、乙腈和二氧六环中分别实验推断的 2.12、2.13 和 2.25ps 值非常吻合。本研究提供了明确的证据,表明直接从头算 QTMF 方法是模拟多态非绝热动力学过程的可靠工具。