Suppr超能文献

比较低水平紧咬时个别牙齿的咬合接触面积。

Comparing the occlusal contact area of individual teeth during low-level clenching.

作者信息

Nishimori Hideta, Iida Takashi, Kamiyama Hirona, Komoda Yoshihiro, Obara Ryoko, Uchida Takashi, Kawara Misao, Komiyama Osamu

机构信息

Department of Oral Function and Rehabilitation, Nihon University School of Dentistry at Matsudo.

Department of Oral Diagnostics, Nihon University School of Dentistry at Matsudo.

出版信息

J Oral Sci. 2017 Sep 14;59(3):337-342. doi: 10.2334/josnusd.16-0453. Epub 2017 May 19.

Abstract

The aim of this study was to investigate the occlusal contact area (OCA) in individual teeth during low-level tooth clenching in 24 healthy participants. Before measurements were made, the 100% maximum voluntary contraction (MVC) was determined. At baseline, all subjects were instructed to close their mouth and touch the opposing teeth with minimal force. Occlusal contact was recorded during three jaw motor tasks (baseline, 20% MVC, and 40% MVC) using a blue silicone material. OCA thickness was determined from images and defined on five levels: level 1 (0-149 µm), level 2 (0-89 µm), level 3 (0-49 µm), level 4 (0-29 µm), and level 5 (0-4 µm). Premolar and molar OCAs increased significantly from baseline to 20% MVC and 40% MVC. The OCA of each anterior tooth did not change significantly with increasing clenching intensity at all levels. Our findings suggest that premolar and molar OCAs may be altered by low-intensity clenching, affecting the teeth and periodontal tissues.

摘要

本研究旨在调查24名健康参与者在低强度牙齿咬紧过程中单个牙齿的咬合接触面积(OCA)。在进行测量之前,先确定100%最大自主收缩(MVC)。在基线时,所有受试者被指示轻轻闭嘴并以最小的力接触对颌牙齿。使用蓝色硅橡胶材料在三项颌骨运动任务(基线、20%MVC和40%MVC)期间记录咬合接触。根据图像确定OCA厚度,并分为五个级别:1级(0-149μm)、2级(0-89μm)、3级(0-49μm)、4级(0-29μm)和5级(0-4μm)。前磨牙和磨牙的OCA从基线到20%MVC和40%MVC显著增加。在所有级别上,随着咬紧强度的增加,每颗前牙的OCA均无显著变化。我们的研究结果表明,低强度咬紧可能会改变前磨牙和磨牙的OCA,从而影响牙齿和牙周组织。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验