Gao Li-Lan, Wei Chao-Lei, Zhang Chun-Qiu, Gao Hong, Yang Nan, Dong Li-Min
Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, School of Mechanical Engineering, Tianjin University of Technology, Tianjin, PR China.
Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, School of Mechanical Engineering, Tianjin University of Technology, Tianjin, PR China.
Mater Sci Eng C Mater Biol Appl. 2017 Aug 1;77:1050-1059. doi: 10.1016/j.msec.2017.03.214. Epub 2017 Mar 27.
The quasi-static and ratcheting properties of trabecular bone were investigated by experiments and theoretical predictions. The creep tests with different stress levels were completed and it is found that both the creep strain and creep compliance increase rapidly at first and then increase slowly as the creep time goes by. With increase of compressive stress the creep strain increases and the creep compliance decreases. The uniaxial compressive tests show that the applied stress rate makes remarkable influence on the compressive behaviors of trabecular bone. The Young's modulus of trabecular bone increases with increase of stress rate. The stress-strain hysteresis loops of trabecular bone under cyclic load change from sparse to dense with increase of number of cycles, which agrees with the change trend of ratcheting strain. The ratcheting strain rate rapidly decreases at first, and then exhibits a relatively stable and small value after 50cycles. Both the ratcheting strain and ratcheting strain rate increase with increase of stress amplitude or with decrease of stress rate. The creep model and the nonlinear viscoelastic constitutive model of trabecular bone were proposed and used to predict its creep property and rate-dependent compressive property. The results show that there are good agreements between the experimental data and predictions.
通过实验和理论预测研究了松质骨的准静态和棘轮特性。完成了不同应力水平下的蠕变试验,发现蠕变应变和蠕变柔量起初迅速增加,然后随着蠕变时间的推移缓慢增加。随着压缩应力的增加,蠕变应变增加而蠕变柔量减小。单轴压缩试验表明,施加的应力速率对松质骨的压缩行为有显著影响。松质骨的杨氏模量随应力速率的增加而增加。循环载荷下松质骨的应力-应变滞后环随着循环次数的增加从稀疏变为密集,这与棘轮应变的变化趋势一致。棘轮应变率起初迅速降低,然后在50次循环后呈现相对稳定且较小的值。棘轮应变和棘轮应变率均随应力幅值的增加或应力速率的降低而增加。提出了松质骨的蠕变模型和非线性粘弹性本构模型,并用于预测其蠕变特性和率相关压缩特性。结果表明,实验数据与预测结果之间有良好的一致性。