Department of Mechanical Engineering, University of Texas at Dallas, 800 W. Campbell Road, Richardson, TX 75080, United States.
Department of Mechanical Engineering, University of Texas at Dallas, 800 W. Campbell Road, Richardson, TX 75080, United States.
J Colloid Interface Sci. 2017 Nov 1;505:1065-1073. doi: 10.1016/j.jcis.2017.06.099. Epub 2017 Jun 30.
This paper reports the condensation and subsequent motion of water droplets on bi-philic surfaces, surfaces that are patterned with regions of different wettability. Bi-philic surfaces can enhance the water collection efficiency: droplets condensing on hydrophobic regions wick into hydrophilic drain channels when droplets grow to a certain size, renewing the condensation on the dry hydrophobic region. The onset of drain phenomenon can be triggered by multiple events with distinct nature ranging from gravity, direct contact between a droplet and a drain channel, to a mutual coalescence between droplets. This paper focuses on the effect of the length scale of hydrophobic regions on the dynamics of mutual coalescence between droplets and subsequent drainage. The main hypothesis was that, when the drop size is sufficient, the kinetic energy associated with a coalescence of droplets may cause dynamic advancing of a newly formed drop, leading to further coalescence with nearby droplets and ultimately to a chain reaction. We fabricate bi-philic surfaces with hydrophilic and hydrophobic stripes, and the result confirms that coalescing droplets, when the length scale of droplets increases beyond 0.2mm, indeed display dynamic expansion and chain reaction. Multiple droplets can thus migrate to hydrophilic drain simultaneously even when the initial motion of the droplets was not triggered by the direct contact between the droplet and the hydrophilic drain. Efficiency of drain due to mutual coalescence of droplets varies depending on the length scale of bi-philic patterns, and the drain phenomenon reaches its peak when the width of hydrophobic stripes is between 800μm and 1mm. The Ohnesorge number of droplets draining on noted surfaces is between 0.0042 and 0.0037 respectively. The observed length scale of bi-philic patterns matches that on the Stenocara beetle's fog harvesting back surface. This match between length scales suggests that the surface of the insect is optimized for the drain of harvested water.
本文报道了双亲和表面上水滴滴的凝结和随后的运动,双亲和表面是用不同润湿性的区域图案化的。双亲和表面可以提高水的收集效率:当液滴生长到一定大小时,在疏水区域凝结的液滴会进入亲水排水通道,从而在干燥的疏水区域重新凝结。排水现象的开始可以由多种具有不同性质的事件触发,这些事件包括重力、液滴与排水通道的直接接触,以及液滴之间的相互聚结。本文重点研究了疏水区域的长度尺度对液滴之间相互聚结和随后排水的动力学的影响。主要假设是,当液滴尺寸足够大时,液滴聚结所产生的动能可能会导致新形成的液滴的动态推进,从而导致与附近液滴的进一步聚结,并最终导致连锁反应。我们制造了具有亲水性和疏水性条纹的双亲和表面,结果证实,当液滴尺寸增加到超过 0.2mm 时,聚结的液滴确实会显示出动态扩展和连锁反应。即使液滴的初始运动不是由液滴与亲水排水通道的直接接触触发的,多个液滴也可以同时迁移到亲水排水通道。由于液滴的相互聚结而导致的排水效率取决于双亲和图案的长度尺度,当疏水条纹的宽度在 800μm 到 1mm 之间时,排水现象达到峰值。在指出的表面上排水的液滴的 Ohnesorge 数分别在 0.0042 和 0.0037 之间。观察到的双亲和图案的长度尺度与 Stenocara 甲虫雾收集背面的长度尺度相匹配。这种长度尺度的匹配表明,昆虫的表面是为了收集水的排水而优化的。