Chemical Engineering Department, Faculty of Science, Universidad de Córdoba, Building Marie-Curie, Campus de Rabanales, 14014, Spain.
Institute of Ceramics and Glass (CSIC), Campus de Cantoblanco, c/Kelsen 5, 28049 Madrid, Spain.
Carbohydr Polym. 2017 Nov 1;175:27-37. doi: 10.1016/j.carbpol.2017.07.055. Epub 2017 Jul 23.
Rapidly growing vegetables could be an abundant and cheap sources of lignocellulose biomass for lignocellulose nanofibre (LCNF) production. The aim of this work is to study the feasibility of using Chamaecytisus proliferus and Leucaena leucocephala for LCNF isolation by mechanical, enzymatic and TEMPO-mediated oxidation pre-treatments. Characterisation of the nanofibres shows that there are significant differences in the production of LCNF depending on the raw material and pre-treatment used. XRD and FTIR analysis show that homogenisation has a strong negative effect on the crystallinity index; however, the higher lignin content of tagasaste (10%) protects the fibre, causing a smaller decrease in crystallinity. The thermal stability of LCNF is also affected by the high lignin content in the case of tagasaste, which exhibited maximum degradation temperatures of 340-315°C, that were higher than those for leucaena (330-310°C). A strong shear thinning behaviour was observed in most of the LCNF, which revealed a great degree of interconnectivity in the gel like-network.
快速生长的蔬菜可能是木质纤维素生物质的丰富且廉价的来源,可用于木质纤维素纳米纤维(LCNF)的生产。本工作旨在研究利用金合欢和银荆通过机械、酶和 TEMPO 介导的氧化预处理分离 LCNF 的可行性。纳米纤维的特性表明,根据所用原料和预处理方法的不同,LCNF 的产量存在显著差异。XRD 和 FTIR 分析表明,均化对结晶度指数有很强的负面影响;然而,塔加斯特(10%)较高的木质素含量保护纤维,导致结晶度下降较小。LCNF 的热稳定性也受到塔加斯特中高木质素含量的影响,其最大降解温度为 340-315°C,高于银荆(330-310°C)。大多数 LCNF 表现出强烈的剪切稀化行为,这表明在凝胶状网络中具有很大程度的互连通路。