Šťastný E, Trč T, Frýdl J, Kopečný Z, Philippou T, Lisý J
Klinika dětské a dospělé ortopedie a traumatologie 2. lékařské fakulty Univerzity Karlovy a Fakultní nemocnice v Motole, Praha.
Acta Chir Orthop Traumatol Cech. 2017;84(4):271-278.
INTRODUCTION The purpose of our paper is to evaluate the mid-term to long-term results and to confirm the basic criteria of a high-quality revision implant: safe bridging of bone defects, achievement of reliable primary fixation of revision acetabular cup, achievement of good secondary stability with documentable osteointegration of cup and demonstration of remodelling of transplanted bone tissue in the area of defects and in spaces between the implant ribs. MATERIAL AND METHODS Altogether 36 patients (38 cups) were evaluated who had undergone revision hip arthroplasty in the period from 2004 to 2010. The mean follow-up was 8.2 years (5.1-11.6 years after the reimplantation, more than 10 years in 16 patients who underwent surgery). The position and osseointegration of the implant were assessed by digital radiography, the remodelling of transplanted bone tissues in the area of defects and between the implant ribs by computed tomography with reducing artefacts around the metal implant (Aquilion 64 - Toshiba Medical Systems), and for the clinical outcomes the Harris Hip Score was used. RESULTS Preoperatively, the condition of the hip joint based on the Harris Hip Score was in 30 cases evaluated as poor, in 8 patients as satisfactory. At the time of final evaluation, 8 patients achieved excellent results, in 19 patients the condition of the joint was very good (in 2 patients bilaterally), in 6 patients it was considered satisfactory and in 3 patients poor. The mean value for HHS increased from 39.5 to 84.5. Based on the radiography evaluation, in 27 patients (in 2 patients bilaterally) the osseointegration of the revision cup was good, in 8 cases with a radiolucent line of 2-4 mm in width in DeLee zone III, in one case proximal migration of the cup occurred caused by deep infection. The informed consent form for pelvic CT was signed by 25 patients of our cohort. Remodelling of bone tissue in the space between the ribs of the implant was always detected, the presence of bone cysts was not reported, the bone defects following the application of autologous spongioplasty in the monitored patients were healed. In 6 patients, an ingrowth of fibrous tissue of 2-4 mm in width in the convexity of the cup was detected. The mean survival of the revision oval-shaped cup - TC type with a follow-up of 8.2 years after the reimplantation based on Kaplan-Meier analysis was 91.4 %. DISCUSSION The number of revision total hip arthroplasties due to a younger age of patients who undergo alloplasty keeps growing. The choice of a revision implant should always match the intraoperative finding and the bone tissue quality. The standard uncemented implants with osteoactive surface can be opted for when anterior and posterior column of the acetabulum are intact (IIA and IIB according to Paprosky). Starting from type IIC, also the proximal part of acetabulum shall be considered. At our department, preference is given to the revision cup - TC type. The oval shape facilitates a lower degree of bone resection and easier restoration of the anatomical centre of rotation. Careful debridement of granulating and necrotic tissue, thorough treatment of bone defects and osteoactive surface of implants in case of adequate primary fixation of the cup substantially contribute to the quality of its osseointegration. Greater rigidity of fixation verified by pull-out tests enables to insert angular stable screws into the gaps in the proximal part of the cup. There is still room for improvement in treating the bone defect. The application of allogenic bone grafts into the defects and spaces between the ribs of the TC cup is more challenging than the use of augmentation in the systems with trabecular titanium. Based on the evaluation of CT scans, remodelling of the transplanted bone occurs, therefore the defect zone is reduced. CONCLUSIONS The oval-shaped uncemented cup - type TC meets the requirements placed on a state-of the art revision implant, moreover its specific construction helps improve the conditions where another re-operation of acetabulum is necessary. By evaluating mid-term to long-term results of non-homogenous group of 36 patients (38 cups) we have obtained data on joint function comparable to similar groups with revision uncemented implants presented in our and foreign literature. Key words: revision oval-shaped cup, bone remodelling, pull-out tests, angular stable screws, computed tomography.
引言 我们论文的目的是评估中期至长期结果,并确认高质量翻修植入物的基本标准:安全桥接骨缺损、实现翻修髋臼杯可靠的初次固定、通过可记录的髋臼杯骨整合实现良好的二次稳定性以及证明缺损区域和植入物肋条之间间隙中移植骨组织的重塑。
材料与方法 共评估了36例患者(38个髋臼杯),这些患者在2004年至2010年期间接受了髋关节翻修术。平均随访时间为8.2年(再植入后5.1 - 11.6年,16例接受手术的患者随访时间超过10年)。通过数字X线摄影评估植入物的位置和骨整合情况,通过减少金属植入物周围伪影的计算机断层扫描(Aquilion 64 - 东芝医疗系统)评估缺损区域和植入物肋条之间移植骨组织的重塑情况,临床结果采用Harris髋关节评分。
结果 术前,根据Harris髋关节评分,30例患者髋关节状况评估为差,8例患者为满意。在最终评估时,8例患者取得优异结果,19例患者关节状况非常好(2例双侧),6例患者被认为满意,3例患者为差。HHS平均值从39.5提高到84.5。根据X线摄影评估,27例患者(2例双侧)翻修髋臼杯的骨整合良好,8例在DeLee III区有宽度为2 - 4 mm的透亮线,1例因深部感染导致髋臼杯近端移位。我们队列中的25例患者签署了骨盆CT知情同意书。总是能检测到植入物肋条之间间隙中骨组织的重塑,未报告骨囊肿的存在,监测患者中应用自体松质骨后骨缺损已愈合。6例患者在髋臼杯凸面检测到宽度为2 - 4 mm的纤维组织长入。基于Kaplan - Meier分析,并在再植入后随访8.2年,翻修椭圆形杯 - TC型的平均生存率为91.4%。
讨论 由于接受关节成形术的患者年龄较轻,翻修全髋关节置换术的数量不断增加。翻修植入物的选择应始终与术中发现和骨组织质量相匹配。当髋臼前后柱完整时(根据Paprosky分类为IIA和IIB),可选择具有骨活性表面的标准非骨水泥植入物。从IIC型开始,还应考虑髋臼近端部分。在我们科室,优先选择翻修杯 - TC型。椭圆形形状有助于减少骨切除程度,并更容易恢复解剖旋转中心。仔细清除肉芽组织和坏死组织、彻底治疗骨缺损以及在髋臼杯初次固定充分的情况下植入物的骨活性表面,对其骨整合质量有很大贡献。通过拔出试验验证的更大固定刚度能够在髋臼杯近端间隙中插入角度稳定螺钉。在治疗骨缺损方面仍有改进空间。将同种异体骨移植到TC杯的缺损和肋条之间的间隙比在小梁钛系统中使用增强材料更具挑战性。基于CT扫描评估,移植骨发生重塑,因此缺损区域减小。
结论 椭圆形非骨水泥杯 - TC型符合对先进翻修植入物的要求,此外其特殊结构有助于改善髋臼再次手术时的条件。通过评估36例患者(38个髋臼杯)的非同质组的中期至长期结果,我们获得了与国内外文献中报道的类似非骨水泥翻修植入物组相当的关节功能数据。
翻修椭圆形杯;骨重塑;拔出试验;角度稳定螺钉;计算机断层扫描