Khataee Alireza, Mohamadi Farzaneh Toutounchi, Rad Tannaz Sadeghi, Vahid Behrouz
Research Laboratory of Advanced Water and Wastewater Treatment Processes, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, 51666-16471 Tabriz, Iran; Department of Materials Science and Nanotechnology Engineering, Near East University, 99138 Nicosia, North Cyprus, Mersin 10, Turkey.
Research Laboratory of Advanced Water and Wastewater Treatment Processes, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, 51666-16471 Tabriz, Iran.
Ultrason Sonochem. 2018 Jan;40(Pt A):361-372. doi: 10.1016/j.ultsonch.2017.07.021. Epub 2017 Jul 13.
Undoped and Dy-doped CdSe nanoparticles are synthesized and then characterized by the SEM, XRD, FT-IR, XPS and BET methods, which verify successful preparation of the doped catalyst. The sonocatalytic degradation of anazolene sodium as a model azo dye is higher than sonolysis process and the 2% Dy-doped CdSe with band gap of 1.42eV exhibits the greatest sonocatalytic performance. The decolorization efficiency (DE%) of sonocatalysis with 2% Dy-doped CdSe, undoped CdSe and sonolysis after 90min of the process is 91.32%, 56.13% and 39.14%, respectively. In addition, the sonocatalytic degradation of anazolene sodium increases with enhancement of the dopant, catalyst dosage, ultrasonic power, dissolved gasses and decreasing of initial anazolene sodium concentration. Furthermore, with addition of chloroform, sulfate, chloride and ethanol as the radical scavengers, the DE% decreases indicating the controlling mechanism of free radicals for the dye degradation. Besides, the results reveal the appropriate reusability of the catalyst and various degradation by-products are identified using the GC-MS technique. Eventually, the empirical kinetic model is expanded by nonlinear regression analysis for prediction of pseudo first-order constants in various operational conditions.
合成了未掺杂和镝掺杂的CdSe纳米颗粒,然后通过扫描电子显微镜(SEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、X射线光电子能谱(XPS)和比表面积分析仪(BET)方法对其进行表征,这些方法验证了掺杂催化剂的成功制备。作为模型偶氮染料的阿那唑啉钠的声催化降解率高于声解过程,带隙为1.42eV的2%镝掺杂CdSe表现出最大的声催化性能。在该过程90分钟后,2%镝掺杂CdSe、未掺杂CdSe的声催化脱色效率(DE%)和声解的脱色效率分别为91.32%、56.13%和39.14%。此外,阿那唑啉钠的声催化降解随着掺杂剂、催化剂用量、超声功率、溶解气体的增加以及阿那唑啉钠初始浓度的降低而增加。此外,加入氯仿、硫酸盐、氯化物和乙醇作为自由基清除剂后,DE%降低,表明自由基对染料降解的控制机制。此外,结果表明催化剂具有适当的可重复使用性,并使用气相色谱-质谱联用(GC-MS)技术鉴定了各种降解副产物。最终,通过非线性回归分析扩展了经验动力学模型,以预测各种操作条件下的伪一级常数。