Katsoufi S, Lazou A E, Giannakourou M C, Krokida M K
Laboratory of Chemistry, Analysis and Design of Food Processes, Department of Food Technology, Faculty of Food Technology and Nutrition, Technological Educational Institute of Athens, Athens, Greece.
Laboratory of Process Analysis and Design, School of Chemical Engineering, National Technical University of Athens, Zografou Campus, 9 Iroon Polytechneiou, 15780 Athens, Greece.
J Food Sci Technol. 2017 Sep;54(10):3338-3348. doi: 10.1007/s13197-017-2786-2. Epub 2017 Aug 22.
The aim of this study was to investigate the mass transfer and quality properties changes during the osmotic dehydration (OD) step of the candying process in pumpkins. The goal was to obtain nutritious, low calorie candied pumpkins improving the time-consuming and inconsistent traditional technique. The osmotic agents were sucrose, oligofructose and mixture of sucrose-oligofructose (1:1), while the concentration of each solution was constant (70° Brix). The process temperature varied in three levels (75, 85 and 95 °C) and the duration was 180 min for sucrose and 240 min for the other osmotic agents. The determined parameters during OD include solid gain, water loss, water activity, chroma, hardness and compression work. An empirical model based on a first-order kinetic equation was developed to predict the products' properties, in which the rate constant is a function of the process temperature. The process temperature ( ) had a significant effect on the water loss and solid gain as well as on the physiochemical characteristics of processed pumpkins. The chroma of osmo-dehydrated pumpkins was affected significantly by process parameters. Both hardness and compression work decreased until an equilibrium value was reached as time and temperature of the process increased, regardless the osmotic agent used.
本研究的目的是调查南瓜糖渍过程中渗透脱水(OD)步骤期间的传质和品质特性变化。目标是获得营养丰富、低热量的糖渍南瓜,改进耗时且不稳定的传统技术。渗透剂为蔗糖、低聚果糖以及蔗糖 - 低聚果糖混合物(1:1),而每种溶液的浓度恒定(70°白利度)。工艺温度分为三个水平(75、85和95°C),蔗糖处理的持续时间为180分钟,其他渗透剂处理的持续时间为240分钟。OD过程中测定的参数包括固形物增加量、失水量、水分活度、色度、硬度和压缩功。建立了基于一级动力学方程的经验模型来预测产品特性,其中速率常数是工艺温度的函数。工艺温度( )对失水量、固形物增加量以及加工南瓜的理化特性有显著影响。渗透脱水南瓜的色度受工艺参数的显著影响。无论使用何种渗透剂,随着工艺时间和温度的增加,硬度和压缩功均会降低,直至达到平衡值。