Migliorati Valentina, Filipponi Adriano, Di Cicco Andrea, De Panfilis Simone, D'Angelo Paola
Dipartimento di Chimica, Università di Roma "La Sapienza" , P.le A. Moro 5, 00185 Roma, Italy.
Dipartimento di Scienze Fisiche e Chimiche, Università degli Studi dell'Aquila , Via Vetoio, 67100 L'Aquila, Italy.
Inorg Chem. 2017 Nov 20;56(22):14013-14022. doi: 10.1021/acs.inorgchem.7b02151. Epub 2017 Oct 30.
The structural modifications induced on a 0.5 M Zn aqueous solution by increasing the pressure to 6.4 GPa were investigated using a combination of X-ray absorption near edge structure (XANES) spectroscopy and molecular dynamics (MD) simulations. The Zn K-edge XANES experimental spectra show two different trends depending on the pressure and temperature conditions of the system. On the one hand, when the pressure is increased to 1.0 GPa while keeping the temperature at 300 K, the highly structured nature of Zn second hydration shell is preserved. On the other hand, when the Zn aqueous solution is simultaneously pressurized and heated to follow the melting curve above 1.0 GPa, the Zn second shell loses its high degree of structuring and becomes much more disordered and unstructured. These results are confirmed by the analysis of MD simulations of Zn aqueous solutions under high pressure. By combining distance and angular distribution functions it is possible to highlight the loss of water structuring in the Zn second coordination shell that takes place upon pressurization and heating. A progressive crowding of the Zn second shell is observed with increasing pressure; the water structure becomes remarkably different from that found at ambient conditions, and for pressure values higher than 1.0 GPa the tetrahedral arrangements of water molecules is highly distorted. Moreover, MD simulations of Zn aqueous solutions performed at 1.0 GPa and at increasing temperature values have shown that the loss of water structuring in the Zn second coordination shell observed by simultaneously pressurizing and heating is due to a combined effect of pressure and temperature, both producing an increase of the Zn second-shell disorder.
采用X射线吸收近边结构(XANES)光谱和分子动力学(MD)模拟相结合的方法,研究了将0.5 M锌水溶液压力提高到6.4 GPa时所引起的结构变化。锌K边XANES实验光谱根据系统的压力和温度条件呈现出两种不同的趋势。一方面,当在300 K保持温度不变的情况下将压力提高到1.0 GPa时,锌第二水合层的高度结构化性质得以保留。另一方面,当锌水溶液同时加压并加热以遵循1.0 GPa以上的熔化曲线时,锌的第二壳层失去其高度的结构化,变得更加无序和无结构。高压下锌水溶液的MD模拟分析证实了这些结果。通过结合距离和角度分布函数,可以突出加压和加热时锌第二配位层中水分子结构的丧失。随着压力增加,观察到锌第二壳层逐渐拥挤;水的结构与在环境条件下发现的结构明显不同,并且对于高于1.0 GPa的压力值,水分子的四面体排列高度扭曲。此外,在1.0 GPa和不断升高的温度值下进行的锌水溶液MD模拟表明,同时加压和加热时观察到的锌第二配位层中水分子结构的丧失是压力和温度共同作用的结果,两者都会导致锌第二壳层无序度增加。