Suppr超能文献

部分互溶混合物甲醇 + 环己烷中由动力学和热力学控制的相互扩散。

Mutual diffusion governed by kinetics and thermodynamics in the partially miscible mixture methanol + cyclohexane.

作者信息

Janzen Tatjana, Zhang Shi, Mialdun Aliaksandr, Guevara-Carrion Gabriela, Vrabec Jadran, He Maogang, Shevtsova Valentina

机构信息

Thermodynamics and Energy Technology, University of Paderborn, 33098 Paderborn, Germany.

出版信息

Phys Chem Chem Phys. 2017 Dec 6;19(47):31856-31873. doi: 10.1039/c7cp06515a.

Abstract

To gain an understanding of the transport and thermodynamic behavior of the highly non-ideal mixture methanol + cyclohexane, three complementary approaches, i.e. experiment, molecular simulation and predictive equations, are employed. The temperature and composition dependence of different diffusion coefficients is studied around the miscibility gap at ambient pressure. On the one hand Fick diffusion coefficients are measured experimentally by interferometric probing and on the other hand Maxwell-Stefan diffusion coefficients and intradiffusion coefficients are sampled by equilibrium molecular dynamics simulation at five temperatures below the upper critical temperature of ∼319 K. The spinodal curve is determined from extrapolation of the experimental Fick diffusion coefficient data and compared to predictions from excess Gibbs energy models. It is found that these models are not capable to correctly describe the activity coefficients over the whole composition range of the studied mixture. Thus, different parameter sets for a modified Wilson model are used for calculations of the thermodynamic factor, which is needed to transform Maxwell-Stefan into Fick diffusion coefficients and vice versa. Further, predictive equations for the Maxwell-Stefan diffusion coefficient, which are based on intradiffusion coefficients, are compared to simulation results. Using different approaches provides a clearer understanding of the relations between kinetic and thermodynamic properties contributing to the diffusion behavior of partially miscible mixtures.

摘要

为了了解高度非理想混合物甲醇 + 环己烷的传输和热力学行为,采用了三种互补的方法,即实验、分子模拟和预测方程。在环境压力下,研究了不同扩散系数在混溶间隙附近的温度和组成依赖性。一方面,通过干涉探测实验测量菲克扩散系数,另一方面,在低于约319 K的上临界温度的五个温度下,通过平衡分子动力学模拟对麦克斯韦 - 斯蒂芬扩散系数和内扩散系数进行采样。由实验菲克扩散系数数据外推确定旋节线,并与过量吉布斯能模型的预测结果进行比较。发现这些模型无法正确描述所研究混合物在整个组成范围内的活度系数。因此,使用修正威尔逊模型的不同参数集来计算将麦克斯韦 - 斯蒂芬扩散系数转换为菲克扩散系数以及反之所需的热力学因子。此外,将基于内扩散系数的麦克斯韦 - 斯蒂芬扩散系数预测方程与模拟结果进行比较。使用不同方法可以更清楚地理解影响部分互溶混合物扩散行为的动力学和热力学性质之间的关系。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验