Department of Industrial and Physical Pharmacy, College of Pharmacy, Purdue University , West Lafayette, Indiana 47907, United States.
Pfizer Inc, Worldwide Research and Development , Cambridge 02139, Massachusetts, United States.
Mol Pharm. 2018 Jan 2;15(1):40-52. doi: 10.1021/acs.molpharmaceut.7b00694. Epub 2017 Dec 20.
Approximately 50% of solid oral dosage forms utilize salt forms of the active pharmaceutical ingredient (API). A major challenge with the salt form is its tendency to disproportionate to produce the un-ionized API form, decreasing the solubility and negatively impacting product stability. However, many of the factors dictating the tendency of a given salt to undergo disproportionation remain to be elucidated. In particular, the role of the solid-state properties of the salt on the disproportionation reaction is unknown. Herein, various solid forms of a model salt, miconazole mesylate (MM), were evaluated for their tendency to undergo disproportionation when mixed with basic excipients, namely tribasic sodium phosphate dodecahydrate (TSPd) and croscarmellose sodium (CCS), and exposed to moderate relative humidity storage conditions. It was observed that the rate and extent of salt disproportionation were significantly different for the various solid forms of MM. As expected, the amorphous salt was highly susceptible to disproportionation, while the dihydrate salt form was resistant to conversion under the conditions tested. In addition, binary excipient blends of amorphous and anhydrous forms exhibited a reduced extent of disproportionation at a higher relative humidity storage condition. This was due to the competitive kinetics between disproportionation to the free base and conversion to the dihydrate salt form. The results of this study provide important insights into the impact of solid-state form on susceptibility to disproportionation that can be utilized for rationally designing robust pharmaceutical formulations.
大约 50%的固体口服剂型都使用活性药物成分(API)的盐形式。盐形式的一个主要挑战是其倾向于发生非均相分解以产生未离解的 API 形式,从而降低溶解度并对产品稳定性产生负面影响。然而,许多决定给定盐发生非均相分解倾向的因素仍有待阐明。特别是,盐的固态特性对非均相分解反应的作用尚不清楚。在此,评估了模型盐米康唑甲磺酸盐(MM)的各种固体形式在与碱性赋形剂(即三磷酸氢二钠十二水合物(TSPd)和交联羧甲基纤维素钠(CCS))混合并暴露于中等相对湿度储存条件下发生非均相分解的倾向。结果表明,MM 的各种固体形式的盐非均相分解的速率和程度有很大差异。正如预期的那样,无定形盐极易发生非均相分解,而二水合物盐形式在测试条件下不易转化。此外,无定形和无水形式的二元赋形剂混合物在较高的相对湿度储存条件下显示出较低的非均相分解程度。这是由于非均相分解为游离碱和转化为二水合物盐形式之间的竞争动力学所致。这项研究的结果提供了对固态形式对非均相分解敏感性的影响的重要见解,可用于合理设计稳健的药物制剂。