Department of Chemical and Biomolecular Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, Republic of Korea.
Department of Chemical and Biomolecular Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, Republic of Korea.
Bioresour Technol. 2018 Jul;259:465-468. doi: 10.1016/j.biortech.2018.03.067. Epub 2018 Mar 15.
This work introduces biodiesel production from wet spent coffee grounds (SCGs) with supercritical methanol without any pre-drying process. Supercritical methanol and subcritical water effectively produced biodiesel via in situ transesterification by inducing more porous SCG and enhancing the efficiency of lipid extraction and conversion. It was also found that space loading was one of the critical factors for biodiesel production. An optimal biodiesel yield of 10.17 wt% of dry SCG mass (86.33 w/w% of esterifiable lipids in SCG) was obtained at reaction conditions of 270 °C, 90 bars, methanol to wet SCG ratio 5:1, space loading 58.4 ml/g and reaction time 20 min. Direct use of wet SCG waste as feedstock for supercritical biodiesel production eliminates the conventional dying process and the need of catalyst and also reduces environmental problems caused by landfill accumulation.
本工作介绍了一种无需预干燥过程即可用超临界甲醇从湿咖啡渣(SCG)生产生物柴油的方法。超临界甲醇和亚临界水通过原位酯交换有效地生产生物柴油,方法是诱导更具多孔性的 SCG 并提高脂质提取和转化效率。还发现空间装载是生物柴油生产的关键因素之一。在反应条件为 270°C、90 巴、甲醇与湿 SCG 的比例为 5:1、空间装载为 58.4 ml/g 和反应时间为 20 分钟时,可获得 10.17 wt%(湿 SCG 质量的干物质)的最佳生物柴油产率(SCG 中可酯化脂质的 86.33 w/w%)。直接将湿 SCG 废物用作超临界生物柴油生产的原料,可省去传统的干燥过程和催化剂的使用,还减少了因垃圾填埋堆积而造成的环境问题。