Laser balloon angioplasty: effect of constant temperature versus constant power on tissue weld strength.

Thermal fusion of intimal plaque with the arterial wall during coronary balloon angioplasty may significantly reduce the incidence of abrupt closure and may reduce the occurrence of delayed restenosis by improvement of luminal size and shape. Although Nd:YAG laser energy has been shown to be effective in the thermal fusion of plaque-arterial wall separations in vitro, the most efficient manner of energy delivery for rapid achievement of therapeutically useful equilibrium tissue temperature during laser exposure has not been defined. A comparison of weld strength achieved was therefore made between two formats of laser delivery: constant power vs. decremental power with an initial high dose followed by the minimal serial decrements necessary to maintain tissue temperature constant for 15 seconds. One hundred sixty-six tissue discs of human postmortem aorta of 11 mm diameter were studied. Intimal plaque was separated from the media, the two layers were juxtaposed, a force of 4 pounds was applied, and a fiberoptic-delivered laser beam was directed perpendicular to the tissue over a 3-mm-diameter nominal spot size. Weld strength was measured as the shear force required to separate completely the two tissue layers. The mean weld strength (75 g) achieved by use of the decremental power format was significantly higher (P less than .01) than the mean strength (32 g and 56 g) achieved by using constant power for 20 and 30 seconds, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)