Forster Nicole, Schindele Stephan, Audigé Laurent, Marks Miriam
1 Department of Teaching, Research and Development, Schulthess Klinik, Zurich, Switzerland.
2 Zurich University of Applied Sciences, School of Health Professions, Institute of Physiotherapy, Winterthur, Switzerland.
J Hand Surg Eur Vol. 2018 Dec;43(10):1066-1075. doi: 10.1177/1753193418770606. Epub 2018 May 6.
This systematic review and meta-analysis investigates the prevalence of complications, reoperations (surgeries without implant modifications) and revisions (surgeries with implant modifications) after proximal interphalangeal joint arthroplasty with pyrocarbon, metal-polyethylene and silicone implants. Thirty-four articles investigating 1868 proximal interphalangeal joints were included. Implant-related complications were associated with 14%, 10% and 11% of the pyrocarbon, metal-polyethylene and silicone implants, respectively, yet these rates were not significantly different from one another. Silicone implants showed more finger deviations (3%) and instabilities (2%) compared with the other implants. Reoperations were fewer for silicone arthroplasties (1%) compared with pyrocarbon (7%) and metal-polyethylene implants (10%). The revision rates of 4%, 3% and 2% were similar for pyrocarbon, metal-polyethylene and silicone implants. Our results indicate that silicone implants remain a valuable option for the treatment of stable proximal interphalangeal joints. Surface replacing implants might be better to correct unstable or deviated proximal interphalangeal joints, although they are associated with a higher risk of reoperations.
本系统评价和荟萃分析研究了使用热解碳、金属-聚乙烯和硅酮植入物进行近端指间关节置换术后并发症、再次手术(未对植入物进行修改的手术)和翻修手术(对植入物进行修改的手术)的发生率。纳入了34篇研究1868个近端指间关节的文章。与植入物相关的并发症分别与14%的热解碳植入物、10%的金属-聚乙烯植入物和11%的硅酮植入物相关,但这些发生率之间没有显著差异。与其他植入物相比,硅酮植入物出现更多的手指偏斜(3%)和不稳定(2%)。与热解碳植入物(7%)和金属-聚乙烯植入物(10%)相比,硅酮关节成形术的再次手术较少(1%)。热解碳、金属-聚乙烯和硅酮植入物的翻修率分别为4%、3%和2%,相似。我们的结果表明,硅酮植入物仍然是治疗稳定近端指间关节的一个有价值的选择。表面置换植入物可能更适合矫正不稳定或偏斜的近端指间关节,尽管它们与再次手术的风险较高相关。