Suppr超能文献

[矢状面牙根位置与上颌前牙区牙槽骨关系的研究:300例正常咬合患者的锥形束CT研究]

[Investigation of sagittal root position in relation to the anterior maxillary alveolar bone: a cone-beam CT study in 300 cases with normal occlusion].

作者信息

Tao R, Meng M, Niu L N, Chen J H, Nico C F, Ma Chufan

机构信息

Department of Operative Dentistry, School of Stomatology, The Fourth Military Medical University & State Key Laboratory of Military Stomatology & National Clinical Research Center for Oral Diseases & Shaanxi Key Laboratory of Stomatology, Xi'an 710032, China.

Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University & State Key Laboratory of Military Stomatology & National Clinical Research Center for Oral Diseases & Shaanxi Key Laboratory of Stomatology, Xi'an 710032, China.

出版信息

Zhonghua Kou Qiang Yi Xue Za Zhi. 2017 Oct 9;52(10):631-636. doi: 10.3760/cma.j.issn.1002-0098.2017.10.010.

Abstract

To investigate the sagittal root position and apical bone height of the maxillary anterior teeth in order to provide anatomical information for immediate implant placement in the esthetic region. Cone-beam CT (CBCT) data from 300 randomly selected patients who met the inclusion criteria were included in this study. After three-dimensional reconstruction, the sagittal plane (the sagittal plane through the long axis of the tooth) was determined. The positions and angulations of the tooth roots were classified with reference to the alveolar process. By comparing the buccal and palatal bone thickness at the mid-root level, the toot positions with reference to the mid-alveolar line were defined and classified as follows, type B (closer to the buccal alveolar surface), type M (midway between the buccal and palatal alveolar surface) and type P (closer to the palatal alveolar surface). By comparing the angulations of the alveolar process with the long axis of the roots, the angulations were classified as follows, type 1 (root apex angulated toward the palatal side or parallel to the alveolus), type 2 (root apex angulated toward the buccal side with the long axis passing posterior to point A) and type 3 (root apex angulated toward the buccal side with the long axis passing anterior to point A). The frequency of each category was counted and the apical bone height was measured. The subjects were divided into three age groups, 19-30 years, 31-50 years and 51-75 years. The overall mean apical bone height of the healthy maxillary central incisors was (9.2±3.0) mm, the lateral incisors was (10.0±2.9) mm and the canine was (8.1±3.1) mm. There was no significant difference in the height of apical bone between central incisors and lateral incisors (0.05). There was no significant difference in the height of apical bone between male and female (0.05). The height of apical bone in group 31-50 years and 51-75 years were greater than that in group 19-30 years (<0.05), respectively. The proportion of the maxillary anterior teeth type B, M, P was 98.5% (1 774/1 800), 0.3% (5/1 800) and 1.2% (21/1 800) respectively. The proportion of type 1, 2, 3 was 2.6% (46/1 800), 58.6% (1 055/1 800) and 38.8% (699/1 800) respectively. There was enough apical bone height in the area of maxillary anterior teeth, but the majority of roots positioned more buccally.

摘要

研究上颌前牙的矢状根位置和根尖骨高度,为美学区域即刻种植提供解剖学信息。本研究纳入了300例随机选取的符合纳入标准患者的锥束CT(CBCT)数据。三维重建后,确定矢状面(通过牙齿长轴的矢状面)。参照牙槽突对牙根的位置和角度进行分类。通过比较牙根中部水平的颊侧和腭侧骨厚度,定义并将相对于牙槽中线的牙根位置分为以下几类:B型(更靠近颊侧牙槽表面)、M型(在颊侧和腭侧牙槽表面之间)和P型(更靠近腭侧牙槽表面)。通过比较牙槽突与牙根长轴的角度,将角度分为以下几类:1型(根尖向腭侧成角或与牙槽平行)、2型(根尖向颊侧成角,长轴经过A点后方)和3型(根尖向颊侧成角,长轴经过A点前方)。统计各类别的频率并测量根尖骨高度。受试者分为三个年龄组,19 - 30岁、31 - 50岁和51 - 75岁。健康上颌中切牙的总体平均根尖骨高度为(9.2±3.0)mm,侧切牙为(10.0±2.9)mm,尖牙为(8.1±3.1)mm。中切牙和侧切牙的根尖骨高度无显著差异(P>0.05)。男性和女性的根尖骨高度无显著差异(P>0.05)。31 - 50岁组和51 - 75岁组的根尖骨高度分别大于19 - 30岁组(P<0.05)。上颌前牙B型、M型、P型的比例分别为98.5%(1774/1800)、0.3%(5/1800)和1.2%(21/1800)。1型、2型、3型的比例分别为2.6%(46/1800)、58.6%(1055/1800)和38.8%(699/1800)。上颌前牙区域有足够的根尖骨高度,但大多数牙根位于更颊侧的位置。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验