Nguyen Phuong A H, Stapleton Lyndsay, Ledesma-Mendoza Adrian, Cuylear Darnell L, Cooperstein Marta A, Canavan Heather E
Biomedical Engineering Graduate Program, University of New Mexico, Albuquerque, New Mexico 87131.
Center for Biomedical Engineering, University of New Mexico, Albuquerque, New Mexico 87131.
Biointerphases. 2018 Sep 19;13(6):06D406. doi: 10.1116/1.5045142.
Poly(-isopropyl acrylamide) (pNIPAM) is a stimulus-responsive polymer that has been of great interest to the bioengineering community. When the temperature is lowered below its lower critical solution temperature (∼32 °C), pNIPAM rapidly hydrates, and adherent cells detach as intact cell sheets. This cell-releasing behavior in a physiologically relevant temperature range has led to NIPAM's use for engineered tissues and other devices. In a previous study, however, the authors found that although most techniques used to polymerize NIPAM yield biocompatible films, some formulations from commercially-available NIPAM (cpNIPAM) can be cytotoxic. In this work, the authors investigate the reasons underlying this anomaly. The authors evaluated the response of a variety of cell types (e.g., bovine aortic endothelial cells, BAECs; monkey kidney epithelial cells, Vero cells; and mouse embryonic fibroblasts, 3T3s) after culture on substrates spin-coated with sol-gel (spNIPAM) and commercially-prepared (cpNIPAM). The relative biocompatibility of each cell type was evaluated using observations of its cell morphology and function (e.g., XTT and Live/Dead assays) after 48 and 96 h in culture. In addition, the substrates themselves were analyzed using NMR, goniometry, and XPS. The authors find that all the cell types were compromised by 96 h in culture with cpNIPAM, although the manner in which the cells are compromised differs; in particular, while Vero and 3T3 cells appear to be undergoing cytotoxic death, BAECs undergo apoptic death. The authors believe that this result is due to a combination of factors, including the presence of short chain oligomers of NIPAM in the commercially-available preparation. This work will provide valuable insights into the cytotoxicity of commercially-prepared polymer substrates for this type of bioengineering work and therefore into the applicability of cells grown on such surfaces for human subjects.
聚(N-异丙基丙烯酰胺)(pNIPAM)是一种对刺激有响应的聚合物,一直受到生物工程界的极大关注。当温度降低到其低临界溶液温度(约32°C)以下时,pNIPAM会迅速水合,贴壁细胞会作为完整的细胞片脱落。这种在生理相关温度范围内的细胞释放行为导致NIPAM被用于工程组织和其他装置。然而,在先前的一项研究中,作者发现尽管大多数用于聚合NIPAM的技术都能产生生物相容性薄膜,但一些市售NIPAM(cpNIPAM)的配方可能具有细胞毒性。在这项工作中,作者研究了这种异常现象背后的原因。作者评估了多种细胞类型(例如牛主动脉内皮细胞、BAECs;猴肾上皮细胞、Vero细胞;以及小鼠胚胎成纤维细胞、3T3细胞)在旋涂有溶胶 - 凝胶(spNIPAM)和商业制备(cpNIPAM)的底物上培养后的反应。在培养48小时和96小时后,通过观察每种细胞类型的细胞形态和功能(例如XTT和活/死检测)来评估其相对生物相容性。此外,使用核磁共振、测角术和X射线光电子能谱对底物本身进行了分析。作者发现,在cpNIPAM中培养96小时后,所有细胞类型都受到了损害,尽管细胞受损的方式有所不同;特别是,虽然Vero细胞和3T3细胞似乎正在经历细胞毒性死亡,但BAECs经历凋亡死亡。作者认为,这一结果是多种因素共同作用的结果,包括市售制剂中存在NIPAM的短链低聚物。这项工作将为这类生物工程工作中商业制备的聚合物底物的细胞毒性提供有价值的见解,从而为在这类表面上生长的细胞对人类受试者的适用性提供见解。