Matsumoto Taiichi, Tang Peter, Fujio Keiji, Strauch Robert J, Rosenwasser Melvin P
Department of Orthopaedic Surgery, Kurashiki Central Hospital, Okayama, Japan.
Department of Orthopaedic Surgery, Allegheny General Hospital, Allegheny Health Network, Pittsburgh, Pennsylvania.
J Wrist Surg. 2018 Nov;7(5):375-381. doi: 10.1055/s-0038-1661361. Epub 2018 Jun 26.
Transosseous repair of foveal detachment of the triangular fibrocartilage complex (TFCC) is effective for distal radioulnar joint stabilization. However, studies of the optimal foveal and TFCC suture positions are scant. The purpose of this study was to clarify the optimal TFCC suture position and bone tunnels for transosseous foveal repair. Seven cadavers were utilized. The TFCC was incised at the foveal insertion and sutured at six locations (TFCCs 1-6) using inelastic sutures. Six osseous tunnels were created in the fovea (foveae 1-6). Fovea 2 is located at the center of the circle formed by the ulnar head overlooking the distal end of the ulna (theoretical center of rotation); fovea 5 is located 2 mm ulnar to fovea 2. TFCC 5 is at the ulnar apex of the TFCC disc; TFCC 4 is 2 mm dorsal to TFCC 5. TFCC 1 to 6 sutures were then placed through each of the six osseous tunnels, resulting in 36 combinations, which were individually tested. The forearm was placed in five positions between supination and pronation, and the degree of suture displacement was measured. The position with the least displacement indicated the isometric point of the TFCC and fovea. The mean distance of suture displacement was 2.4 ± 1.6 mm. Fovea 2, combined with any TFCC location, (0.7 ± 0.6 mm) and fovea group 5, combined with TFCC 4 location (0.8 ± 0.8) or with TFCC 5 location (0.9 ± 0.6) had statistically shorter suture displacements than any other fovea groups. For TFCC transosseous repair, osseous tunnel position was more important than TFCC suture location.
经骨修复三角纤维软骨复合体(TFCC)中央凹脱离对桡尺远侧关节稳定有效。然而,关于中央凹和TFCC最佳缝合位置的研究较少。 本研究的目的是明确经骨中央凹修复的最佳TFCC缝合位置和骨隧道。 使用了7具尸体。在中央凹附着处切开TFCC,并使用无弹性缝线在6个位置(TFCC 1 - 6)进行缝合。在中央凹创建6个骨隧道(中央凹1 - 6)。中央凹2位于从尺骨头俯瞰尺骨远端形成的圆的中心(理论旋转中心);中央凹5位于中央凹2尺侧2毫米处。TFCC 5位于TFCC盘的尺侧顶点;TFCC 4位于TFCC 5背侧2毫米处。然后将TFCC 1至6缝线穿过6个骨隧道中的每一个,产生36种组合,分别进行测试。将前臂置于旋前和旋后之间的5个位置,并测量缝线移位程度。移位最少的位置表明是TFCC和中央凹的等长点。 缝线移位的平均距离为2.4±1.6毫米。中央凹2与任何TFCC位置组合(0.7±0.6毫米)以及中央凹组5与TFCC 4位置(0.8±0.8)或与TFCC 5位置(0.9±0.6)组合的缝线移位在统计学上比任何其他中央凹组短。 对于TFCC经骨修复,骨隧道位置比TFCC缝合位置更重要。