Zhong Sheng, Li Weihang, Wang Bin, Ren Jiaxin, Li Hui, Zhao Yingjing, Jiang Shanshan, Fan Yuxiang, Cheng Ye, Zhao Gang, Liu Xinrui, Jin Rihua
Department of Neurosurgery, the First Hospital of Jilin University.
Clinical College, Jilin University.
Medicine (Baltimore). 2018 Nov;97(45):e13095. doi: 10.1097/MD.0000000000013095.
This study aims to find accurate angles and depths of lateral ventricle puncture using diffusion tensor imaging (DTI) reconstruction, as well as to provide an optimized and alternative puncturing strategy.A total of 90 computed tomography (CT) images and 30 CT images with DTI were analyzed. The measurements were performed on coronal, sagittal, and horizontal planes. Some distances and angles were measured to determine the best angle and penetration depth during the puncture process. Important landmarks of the lateral ventricle were also measured, and a comparison of the differences between 2 hemispheres was also assessed.It showed that the vertical distance from the superior margin to inferior margin of the lateral ventricle was 22.2 ± 0.5 mm and the length was 124.1 ± 2.1 mm. In the frontal horn puncture approach, the penetration depth should be limited between 105.2 and 109.4 mm, the angle should be 71.6 ± 2.7°. During the occipital horn puncture approach, puncturing depth was from 90.7 to 111.4 mm, and angle was 15.3 ± 1.8°. Through the parietal lobe puncture approach, which was firstly brought out in this study, the puncturing length should be 124.4 to 130.2 mm and angle was 56.6 ± 2.0°.The traditional recommended protocol of lateral ventricle puncture is not accurate, the refined lateral ventricle puncture protocol established in this study will reduce injury and remain function. A DTI imaging examination combining with nerve fibers reconstruction were strongly recommended before lateral ventricle puncture, which will help neurosurgeons to determine the best puncturing angles and depth.
本研究旨在利用弥散张量成像(DTI)重建技术寻找侧脑室穿刺的准确角度和深度,并提供一种优化的、可供选择的穿刺策略。共分析了90例计算机断层扫描(CT)图像和30例带有DTI的CT图像。测量在冠状面、矢状面和水平面进行。测量了一些距离和角度,以确定穿刺过程中的最佳角度和进针深度。还测量了侧脑室的重要标志点,并评估了两个半球之间差异的比较。结果显示,侧脑室上缘至下缘的垂直距离为22.2±0.5mm,长度为124.1±2.1mm。在前角穿刺入路中,进针深度应限制在105.2至109.4mm之间,角度应为71.6±2.7°。在枕角穿刺入路中,穿刺深度为90.7至111.4mm,角度为15.3±1.8°。通过本研究首次提出的顶叶穿刺入路,穿刺长度应为124.4至130.2mm,角度为56.6±2.0°。传统推荐的侧脑室穿刺方案不准确,本研究建立的精细化侧脑室穿刺方案将减少损伤并保留功能。强烈建议在侧脑室穿刺前进行DTI成像检查并结合神经纤维重建,这将有助于神经外科医生确定最佳穿刺角度和深度。