Hardy Luke A, Chang Chun-Hung, Myers Erinn M, Kennelly Michael J, Fried Nathaniel M
Department of Physics and Optical Science, University of North Carolina at Charlotte.
McKay Department of Urology, Carolinas Medical Center, Charlotte, North Carolina.
Proc SPIE Int Soc Opt Eng. 2016 Feb;9689. doi: 10.1117/12.2208126. Epub 2016 Feb 29.
Treatment of female stress urinary incontinence (SUI) by laser thermal remodeling of subsurface tissues is studied. Light transport, heat transfer, and thermal damage simulations were performed for transvaginal and transurethral methods. Monte Carlo (MC) provided absorbed photon distributions in tissue layers (vaginal wall, endopelvic fascia, urethral wall). Optical properties (n,μ,μ,g) were assigned to each tissue at λ=1064 nm. A 5-mm-diameter laser beam and power of 5 W for 15 s was used, based on previous experiments. MC output was converted into absorbed energy, serving as input for ANSYS finite element heat transfer simulations of tissue temperatures over time. Convective heat transfer was simulated with contact cooling probe set at 0 °C. Thermal properties (κ,c,ρ) were assigned to each tissue layer. MATLAB code was used for Arrhenius integral thermal damage calculations. A temperature matrix was constructed from ANSYS output, and finite sum was incorporated to approximate Arrhenius integral calculations. Tissue damage properties (E,A) were used to compute Arrhenius sums. For the transvaginal approach, 37% of energy was absorbed in endopelvic fascia layer with 0.8% deposited beyond it. Peak temperature was 71°C, treatment zone was 0.8-mm-diameter, and almost all of 2.7-mm-thick vaginal wall was preserved. For transurethral approach, 18% energy was absorbed in endopelvic fascia with 0.3% deposited beyond it. Peak temperature was 80°C, treatment zone was 2.0-mm-diameter, and only 0.6 mm of 2.4-mm-thick urethral wall was preserved. A transvaginal approach is more feasible than transurethral approach for laser treatment of SUI.
研究了通过对皮下组织进行激光热重塑来治疗女性压力性尿失禁(SUI)。对经阴道和经尿道方法进行了光传输、热传递和热损伤模拟。蒙特卡罗(MC)方法提供了组织层(阴道壁、盆内筋膜、尿道壁)中的吸收光子分布。在波长λ = 1064 nm下为每个组织赋予光学特性(n、μ、μ,g)。基于先前的实验,使用直径为5 mm的激光束,功率为5 W,持续15 s。MC输出被转换为吸收能量,作为ANSYS有限元热传递模拟组织温度随时间变化的输入。通过将接触冷却探头设置为0°C来模拟对流热传递。为每个组织层赋予热特性(κ、c、ρ)。使用MATLAB代码进行阿伦尼乌斯积分热损伤计算。从ANSYS输出构建温度矩阵,并纳入有限和以近似阿伦尼乌斯积分计算。使用组织损伤特性(E、A)来计算阿伦尼乌斯和。对于经阴道方法,37%的能量在盆内筋膜层被吸收,0.8%沉积在其之外。峰值温度为71°C,治疗区域直径为0.8 mm,几乎保留了所有2.7 mm厚的阴道壁。对于经尿道方法,18%的能量在盆内筋膜被吸收,0.3%沉积在其之外。峰值温度为80°C,治疗区域直径为2.0 mm,仅保留了2.4 mm厚尿道壁的0.6 mm。对于SUI的激光治疗,经阴道方法比经尿道方法更可行。