Queensland Alliance for Environmental Health Sciences (QAEHS), The University of Queensland, 20 Cornwall Street, Woolloongabba, QLD, 4102, Australia.
Queensland Alliance for Environmental Health Sciences (QAEHS), The University of Queensland, 20 Cornwall Street, Woolloongabba, QLD, 4102, Australia.
Chemosphere. 2019 Sep;230:173-181. doi: 10.1016/j.chemosphere.2019.05.021. Epub 2019 May 6.
Surfactant mixtures are commonly used in agricultural and soil remediation applications, necessitating an understanding of their micellization behavior and associated impact on the fate of co-existing chemicals in the subsurface. A polymer-water sorption isotherm approach was shown to present an alternative to traditional methods for quantifying, understanding and predicting surfactant mixture properties. Micelle compositions were measured for anionic-nonionic surfactant mixtures. This is important since micelle composition can alter the apparent aqueous solubility of super-hydrophobic organic contaminants (SHOCs) resulting in surfactant facilitated transport (SFT). A key parameter in predicting SFT for SHOCs is their micelle-water partition constant (K). These were determined for polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated biphenyls (PCBs) with representative anionic-nonionic surfactant mixtures using a polymer depletion method. These previously unreported constants were intermediate between those for pure anionic and nonionic surfactant solutions, with magnitude depending on micelle composition. Separate linear relationships were found between log K and log K for PCDDs and PCBs. This work provides new methods and preliminary results relating to binary surfactant mixtures (e.g. critical micelle concentration and micelle composition) and SHOCs (K) that are important in the evaluation of the fate and transport of SHOCs in the subsurface environment and provide insight into the environmental mobility of these important contaminants.
表面活性剂混合物在农业和土壤修复应用中通常被使用,这就需要了解它们的胶束化行为,以及它们对地下共存化学物质命运的影响。聚合物-水吸附等温线方法被证明是一种替代传统方法来定量、理解和预测表面活性剂混合物性质的方法。对阴离子-非离子表面活性剂混合物进行了胶束组成的测量。这一点很重要,因为胶束组成可以改变超疏水有机污染物(SHOCs)的表观水溶解度,从而导致表面活性剂促进的传输(SFT)。预测 SHOCs 的 SFT 的关键参数是它们的胶束-水分配常数(K)。使用聚合物耗尽方法,用代表性的阴离子-非离子表面活性剂混合物测定了多氯二苯并对二恶英(PCDDs)和多氯联苯(PCBs)的这些常数。这些以前未报道的常数介于纯阴离子和非离子表面活性剂溶液之间,其大小取决于胶束组成。发现 PCDDs 和 PCBs 的 log K 与 log K 之间存在单独的线性关系。这项工作提供了与二元表面活性剂混合物(例如临界胶束浓度和胶束组成)和 SHOCs(K)相关的新方法和初步结果,这些结果对于评估 SHOCs 在地下环境中的命运和迁移具有重要意义,并深入了解这些重要污染物的环境迁移性。