Department of Chemistry & Centre of Advanced Studies in Chemistry, Panjab University, 160014, Chandigarh, India.
Department of Bio and Nano Technology, Guru Jambheshwar University of Science and Technology, 125001, Hisar, Haryana, India.
Sci Rep. 2019 May 29;9(1):8050. doi: 10.1038/s41598-019-44525-4.
In order to maintain a healthy organisation of bionetworks, both qualitative and quantitative estimation of hexavalent chromium in food and beverage samples is required based on proper quality control and assurance. Nonetheless, conventional quantitation techniques for hexavalent chromium generally suffer from certain limitations (e.g., the need for expertise, costly equipment, and a complicated procedure). This research was performed to elaborate a novel method to quantify hexavalent chromium based on an electrochemical cyclic voltammetry technique. To this end, nanochips of manganese oxide (MnO: approximately 80-90 nm diameter and 10 nm thickness) were synthesized using a chemical method and characterized with spectroscopic and microscopic approaches. These nanochips were employed as proficient electrocatalytic materials in direct redox sensing of hexavalent chromium in both real samples and laboratory samples. Manganese oxide nanochips felicitated large surface area and catalytic action for direct electrochemical reduction of hexavalent chromium at electrode surface. This fabricated nanochip sensor presented a detection limit of 9.5 ppb with a linear range of 50-400 ppb (sensitivity of 25.88 µA cm ppb).
为了维持生物网络的健康组织,需要基于适当的质量控制和保证,对食品和饮料样品中的六价铬进行定性和定量估计。然而,六价铬的常规定量技术通常存在某些局限性(例如,需要专业知识、昂贵的设备和复杂的程序)。本研究旨在阐述一种基于电化学循环伏安技术定量六价铬的新方法。为此,使用化学方法合成了氧化锰纳米芯片(MnO:直径约为 80-90nm,厚度为 10nm),并通过光谱和显微镜方法对其进行了表征。这些纳米芯片被用作在实际样品和实验室样品中直接检测六价铬的高效电催化材料。氧化锰纳米芯片提供了大的表面积和催化作用,有利于六价铬在电极表面的直接电化学还原。该制备的纳米芯片传感器的检测限为 9.5ppb,线性范围为 50-400ppb(灵敏度为 25.88µA·cm·ppb)。