Chemical Engineering Department. Research Institute for Chemical and Environmental Technology (ITQUIMA). University of Castilla- La Mancha, 13071, Ciudad Real, Spain; Univ Rennes, Ecole Nationale Supérieure de Chimie de Rennes, CNRS, UMR 6226, F-35000, Rennes, France.
Univ Rennes, Ecole Nationale Supérieure de Chimie de Rennes, CNRS, UMR 6226, F-35000, Rennes, France.
Chemosphere. 2019 Dec;237:124447. doi: 10.1016/j.chemosphere.2019.124447. Epub 2019 Jul 24.
The removal of a commercial herbicide, based on clopyralid, by means of Electro-Fenton (EF) was studied using a soil washing effluent obtained using synthetic ground water as washing fluid. From the results, it was observed that the degradation and mineralization yields of clopyralid were high, even without the addition of supporting electrolyte. The groundwater could be then used as a sustainable supporting electrolyte. The influence of the minerals constituents, the current and the ferrous ions regeneration was evaluated. The highest hydrogen peroxide production was achieved working at 200 mA but regeneration of ferrous ions was not efficient at this current. Iodide ions were one of the main responsible in the EF efficiency decrease due to their reaction with the produced hydrogen peroxide. Electrochemical study proved that clopyralid was not electroactive and that its degradation was mainly due to radical oxidation. Long duration electrolysis carried out at 200 mA in groundwater provided an improvement of the solution biodegradability after 480 min that can be linked to a significant increase in the carboxylic acids production. These results support the feasibility of applying an EF process in order to carry out a subsequent biological mineralization.
用电-Fenton(EF)法去除以氯吡咯醛为基础的商业除草剂,使用合成地下水作为洗涤液的土壤洗涤废水进行了研究。结果表明,即使不添加支持电解质,氯吡咯醛的降解和矿化产率也很高。地下水随后可作为可持续的支持电解质。评估了矿物成分、电流和亚铁离子再生的影响。在 200 mA 下工作时,可实现最高的过氧化氢产量,但在此电流下,亚铁离子的再生效率不高。碘离子是 EF 效率降低的主要原因之一,因为它们与产生的过氧化氢反应。电化学研究证明,氯吡咯醛没有电化学活性,其降解主要是由于自由基氧化。在地下水 200 mA 的长时间电解后,480 分钟后可提高溶液的可生物降解性,这可能与羧酸产量的显著增加有关。这些结果支持了应用 EF 工艺进行后续生物矿化的可行性。