Cross Cancer Institute, Edmonton, Alberta T6G 1Z2, Canada.
Cross Cancer Institute, Edmonton, Alberta T6G 1Z2, Canada; Department of Oncology, University of Alberta, Edmonton, Alberta, Canada.
Med Dosim. 2020;45(2):140-148. doi: 10.1016/j.meddos.2019.08.003. Epub 2019 Sep 24.
Dose-wall histograms (DWHs) have been used as alternatives to dose-volume histograms (DVHs) for hollow organs, with the rationale that the dose delivered to the interior of a hollow organ would be unrelated to the level of radiation damage. The purpose of this study is to conduct a statistical comparison of dose statistics for both walled and solid structure contours for both bladder and rectum in the treatment of intermediate risk prostate cancer with volumetric arc therapy (VMAT). Ten intermediate risk prostate cases were randomly selected. Rectum and bladder were first contoured as solid structures, and then the corresponding wall structures were generated using either a slice-by-slice cropping (2D method), or with a full 3D cropping tool (3D method). Each case was then inverse planned using a 2-arc VMAT technique. Two plans per case were created, 1 with a hypofractionated treatment and 1 with a standard fractionated treatment. DVHs were calculated for solid structure contours, and DWHs were calculated for the walled structure contours generated using 2D and 3D contouring tools. A nonparametric Spearman statistic correlation test was used to compare a large number of relevant dose histogram points, and to establish the relationship between dose statistics for walled and solid structures. Several notable relationships were observed. Maximum rectal dose was strongly correlated between the solid structure and both the 2D-generated (Spearman's correlation r = 0.988, p < 0.01) and 3D-generated (r = 0.952 p< 0.01) wall structures. This indicates that the rectal hot spot occurred in or near the wall for all cases, suggesting that both structure types give similar maximum dose information for rectum. Maximum bladder dose was not significantly correlated between solid structures and the 2D (r = 0.596, p= 0.069) and 3D-generated (r = 0.681, p= 0.03) counterparts. This suggests that the maximum dose is not consistently in or near the bladder wall. This favors the use of bladder wall contours when considering bladder toxicity, with the maximum dose to the wall potentially being more relevant radiobiologically. This analysis was extended to many other relevant points on the rectum and bladder histogram curves. Where correlations are strong, equations of best-fit are presented. This work establishes several statistically-significant relationships between bladder and rectum DVHs and DWHs for VMAT irradiation of intermediate-risk prostate cancer. This information may be used to inform contouring requirements for clinical trial design as well as for standard patient care.
剂量-壁直方图(DWHs)已被用作中空器官的剂量-体积直方图(DVHs)的替代方法,其基本原理是中空器官内部接受的剂量与辐射损伤程度无关。本研究的目的是对容积弧形治疗(VMAT)治疗中危前列腺癌时膀胱和直肠的壁结构和实体结构轮廓的剂量统计数据进行统计比较。随机选择了 10 例中危前列腺癌患者。首先将直肠和膀胱描绘为实体结构,然后使用切片裁剪(2D 方法)或全 3D 裁剪工具(3D 方法)生成相应的壁结构。然后,每个病例都使用 2 个弧形 VMAT 技术进行逆规划。每个病例生成了 2 个计划,1 个为低分割治疗,1 个为标准分割治疗。为实体结构轮廓计算了 DVHs,并为使用 2D 和 3D 轮廓工具生成的壁结构轮廓计算了 DWHs。使用非参数 Spearman 统计相关测试比较了大量相关剂量直方图点,并建立了壁结构和实体结构之间的剂量统计关系。观察到了几个显著的关系。直肠最大剂量与实体结构以及 2D 生成的(Spearman 相关系数 r=0.988,p<0.01)和 3D 生成的(r=0.952,p<0.01)壁结构之间具有很强的相关性。这表明所有病例的直肠热点都发生在壁内或附近,表明这两种结构类型都能为直肠提供相似的最大剂量信息。实体结构与 2D(r=0.596,p=0.069)和 3D 生成的(r=0.681,p=0.03)对应的膀胱最大剂量之间无显著相关性。这表明最大剂量并不总是在膀胱壁内或附近。这有利于在考虑膀胱毒性时使用膀胱壁轮廓,因为壁的最大剂量在放射生物学上可能更相关。这项分析扩展到了直肠和膀胱直方图曲线的许多其他相关点。当相关性较强时,会给出最佳拟合方程。本工作为中危前列腺癌 VMAT 照射时膀胱和直肠的 DVH 和 DWH 之间建立了几个具有统计学意义的关系。这些信息可用于为临床试验设计和标准患者护理提供轮廓要求的信息。