Osteonecrosis and Joint Reconstruction Ward, Department of Joint Surgery, Honghui Hospital, Xi'an Jiaotong University, Xi'an, Shaanxi, 710054, P.R. China.
Department of Radiology and Imaging Sciences, Honghui Hospital, Xi'an Jiaotong University, Xi'an, Shaanxi, 710054, P.R. China.
BMC Musculoskelet Disord. 2020 May 23;21(1):323. doi: 10.1186/s12891-020-03300-7.
Consensus on tibial rotation in total knee arthroplasty (TKA) remains controversial. The present study aimed to investigate the closest anatomical reference to surgical epicondylar axis (SEA) among 10 tibial markers in Chinese adults.
This study included examination of 122 normal lower extremities. Briefly, 10 axes were drawn on the axial sections: transverse axis of tibia (TAT), axis of medial edge of patellar tendon (MEPT), axis of medial 1/3 of patellar tendon attachment (M1/3), Akagi line, Insall line, axis of medial border of tibial tubercle (MBTT), and axis of anterior border of the tibia 1-4 (ATC1-4). The mean angles between TAT and SEA and that between other axes and the line perpendicular to SEA were measured. Pairwise differences among the 10 tibial axes were examined by applying one-way analysis of variance (ANOVA) and paired t-test.
In all the knees, the mean angles of M1/3, Akagi line, Insall line, MBTT, ATC1, ATC2, ATC3, and ATC4 axes were compared to the line perpendicular to the projected SEA and found to be 10.2 ± 5.1°, 1.4 ± 5.0°, 11.9 ± 5.4°, 3.6 ± 4.8°, 12.0 ± 6.9°, 7.2 ± 8.6°, 7.1 ± 10.4°, and 6.6 ± 13.5° external rotation, respectively, and the MEPT axis was 1.6 ± 4.5° internal rotation. The mean angle for TAT was 4.1 ± 5.3° external rotation. The M1/3 and Insall line were significantly more externally rotated than Akagi line, MEPT, MBTT, TAT, ATC2, ATC3, and ATC4 axes. No significant differences were noted between the TAT axis and the MBTT axis and among the ATC2, ATC3, and ATC4 axes.
The Akagi line, MBTT, and TAT showed good consistency with SEA in the axial femorotibial alignment with knee in extension. The middle segment of the anterior tibial crest also demonstrated good alignment consistency with SEA for the axial femorotibial alignment. Hence, these markers can be used as reliable references for rotational alignment of the tibial component in TKA.
全膝关节置换术(TKA)中胫骨旋转的共识仍然存在争议。本研究旨在探讨中国人胫骨 10 个标记物中与手术髁上轴(SEA)最接近的解剖参考。
本研究纳入了 122 例正常下肢。简要地说,在轴位切片上绘制了 10 个轴:胫骨横轴(TAT)、髌腱内侧缘轴线(MEPT)、髌腱附着的内侧 1/3 轴线(M1/3)、赤井线、Insall 线、胫骨结节内侧缘轴线(MBTT)和胫骨前侧 1-4 边界轴线(ATC1-4)。测量 TAT 与 SEA 之间的平均角度和其他轴与垂直于 SEA 的线之间的平均角度。应用单因素方差分析(ANOVA)和配对 t 检验检验 10 个胫骨轴之间的两两差异。
在所有膝关节中,M1/3、赤井线、Insall 线、MBTT、ATC1、ATC2、ATC3 和 ATC4 轴与平行于 SEA 的线之间的平均角度为 10.2±5.1°、1.4±5.0°、11.9±5.4°、3.6±4.8°、12.0±6.9°、7.2±8.6°、7.1±10.4°和 6.6±13.5°外旋,而 MEPT 轴为 1.6±4.5°内旋。TAT 的平均角度为 4.1±5.3°外旋。M1/3 和 Insall 线比赤井线、MEPT、MBTT、TAT、ATC2、ATC3 和 ATC4 轴更明显外旋。TAT 轴与 MBTT 轴之间以及 ATC2、ATC3 和 ATC4 轴之间没有显著差异。
在膝关节伸直时,赤井线、MBTT 和 TAT 在轴向股骨胫骨对线中与 SEA 具有较好的一致性。胫骨前嵴的中节段在轴向股骨胫骨对线中也与 SEA 具有较好的一致性。因此,这些标记物可作为 TKA 胫骨组件旋转对线的可靠参考。