Institut Des Corps Gras (ITERG) , Canejan, France.
Oilseed-protein Crops Technology Platform (OLEAD) , Canejan, France.
Food Addit Contam Part A Chem Anal Control Expo Risk Assess. 2020 Sep;37(9):1491-1502. doi: 10.1080/19440049.2020.1778188. Epub 2020 Jul 21.
Processing Factors (PFs) reflect the concentration or dilution of pesticide residues resulting from food processing. PFs are key elements to demonstrate the compliance of processed foods with Maximum residue levels (MRLs) as set by Regulation 396/2005. While efforts have been made by the European Food Safety Authority (EFSA) and by national authorities to compile PFs from processing studies, such PFs are not available for all pesticides/processed product combinations. The EU vegetable oil and proteinmeal industry association (FEDIOL) has therefore developed a theoretical approach to approximate MRLs in crude vegetable oils and fats, based on the partition coefficient (log P) of the pesticides and on the oil content of the raw materials. To substantiate this approach, a pilot-scale processing study was initiated with rapeseeds spiked with selected pesticides and the experimental PFs for these pesticides determined. The aims of this study were (i) to study the reliability of pilot-scale conditions for PF determination and (ii) to assess the experimental PFs obtained in comparison to the theoretical PFs proposed by FEDIOL. This study demonstrated that production yields obtained for crude oil and meal in this processing study are similar to those in industrial processes even if differences were observed in the individual production steps (mechanical or solvent extraction steps). The experimental PFs obtained confirmed that the chosen fat-soluble pesticides did concentrate in the oil fraction. For metalaxyl-M having a log P lower than 3, a partitioning between the oil and the meal was observed, as expected. By comparing the experimental PFs and theoretical PFs, it can be concluded that the FEDIOL approach can be recommended as a suitable tool when PFs derived from specific processing studies are missing. Similar studies on pesticides with wider ranges of log P are required in order to complete our conclusions on default PFs for vegetable oils.
处理因子(PFs)反映了由于食品加工而导致的农药残留的浓缩或稀释。PFs 是证明加工食品符合法规 396/2005 规定的最大残留限量(MRLs)的关键要素。虽然欧洲食品安全局(EFSA)和各国当局已经努力从加工研究中汇编 PFs,但并非所有农药/加工产品组合都有这些 PFs。因此,欧盟植物油和蛋白粕行业协会(FEDIOL)已经开发了一种理论方法,根据农药的分配系数(log P)和原材料的油含量,来估算粗植物油和脂肪中的 MRL。为了证实这种方法,用选定的农药对油菜籽进行了中试规模的加工研究,并确定了这些农药的实验 PFs。本研究的目的是:(i)研究中试条件确定 PF 的可靠性,(ii)评估与 FEDIOL 提出的理论 PF 相比,实验 PF 的获得情况。这项研究表明,即使在各个生产步骤(机械或溶剂萃取步骤)中存在差异,在这种加工研究中获得的粗油和油粕的生产收率与工业过程相似。实验 PFs 证实,所选脂溶性农药确实集中在油馏分中。对于 log P 低于 3 的甲霜灵-M,观察到它在油和粕之间分配,这是预期的。通过比较实验 PFs 和理论 PFs,可以得出结论,当缺少特定加工研究得出的 PFs 时,FEDIOL 方法可以作为一种合适的工具。需要对具有更广泛 log P 范围的农药进行类似的研究,以便完成我们对植物油默认 PFs 的结论。