Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, National Demonstration Center for Experimental Mechanical and Electrical Engineering Education, School of Mechanical Engineering, Tianjin University of Technology, Tianjin, 300384, China.
Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, National Demonstration Center for Experimental Mechanical and Electrical Engineering Education, School of Mechanical Engineering, Tianjin University of Technology, Tianjin, 300384, China.
J Mech Behav Biomed Mater. 2021 Jan;113:104131. doi: 10.1016/j.jmbbm.2020.104131. Epub 2020 Oct 8.
Currently, Periodontal ligament (PDL) is considered as a viscoelastic solid biomaterial. However, we observed the steady-state rheological behavior of PDL through long time loading experiments, and suggested the theoretical definition of PDL as a viscoelastic fluid biomaterial. PDL specimens were prepared from the middle area of the mandibular central incisors in pigs. Dynamic force loading with frequencies of 0 (static load), 2, 5, and 10 Hz and amplitudes of 0.01, 0.02, and 0.03 MPa was adopted. The shear strain-time curve at the equilibrium position of PDL was obtained by a dynamic shear creep experiment. The results showed that the shear strain increased exponentially at first and then inclined toward an oblique line. The results showed that the PDL has viscoelastic fluid characteristics, independent of frequency and amplitude. The shear strain decreased with an increase in frequency and amplitude. To further analyze the viscoelastic characteristics of PDL, a 50000-s static shear creep experiment was re-designed. PDL exhibited viscoelastic fluid biomaterial characteristics according to the three aspects of the algebraic fitting, geometric characteristics, and physical results. For the first time, a viscoelastic fluid constitutive model was established to characterize the mechanical properties of PDL with high fitting accuracy. Furthermore, the shear viscosity coefficient of the dynamic load was larger than that of the static load, increasing with an increase in frequency and amplitude; compared with the static force, the dynamic force improved the viscosity of PDL, enhancing its function of fixing teeth, and introducing the new medical knowledge of "No tooth extraction after a meal."
目前,牙周韧带(PDL)被认为是一种黏弹性固体生物材料。然而,我们通过长时间的加载实验观察到了 PDL 的稳态流变行为,并提出了将 PDL 理论定义为黏弹性流体生物材料的建议。PDL 标本取自猪下颌中切牙的中间区域。采用频率为 0(静载)、2、5 和 10 Hz,幅值为 0.01、0.02 和 0.03 MPa 的动态力加载。通过动态剪切蠕变实验获得 PDL 在平衡位置的剪切应变速率-时间曲线。结果表明,剪切应变速率最初呈指数增长,然后趋于斜线。结果表明 PDL 具有黏弹性流体特性,与频率和幅值无关。剪切应变速率随频率和幅值的增加而减小。为了进一步分析 PDL 的黏弹性特性,重新设计了一个 50000 s 的静态剪切蠕变实验。根据代数拟合、几何特征和物理结果三个方面,PDL 表现出黏弹性流体生物材料特性。首次建立了黏弹性流体本构模型,以高精度拟合的方式来描述 PDL 的力学特性。此外,动态载荷的剪切黏度系数大于静态载荷的剪切黏度系数,且随着频率和幅值的增加而增大;与静载相比,动载提高了 PDL 的黏度,增强了其固齿功能,引入了“饭后不拔牙”的新医学知识。