Samsudin Mohamad Fakhrul Ridhwan, Ullah Habib, Tahir Asif A, Li Xiaohong, Ng Yun Hau, Sufian Suriati
Chemical Engineering Department, Universiti Teknologi PETRONAS, 32610 Bandar Seri Iskandar, Perak, Malaysia.
Renewable Energy Group, College of Engineering, Mathematics and Physical Sciences, University of Exeter, Penryn Campus, Cornwall TR10 9FE, United Kingdom.
J Colloid Interface Sci. 2021 Mar 15;586:785-796. doi: 10.1016/j.jcis.2020.11.003. Epub 2020 Nov 5.
Herein, we performed an encyclopedic analysis on the photoelectrocatalytic hydrogen production of BiVO/g-CN decorated with reduced graphene oxide (RGO) or graphene quantum dots (GQDs). The differences between RGO and GQDs as an electron mediator was revealed for the first time in the perspective of theoretical DFT analysis and experimental validation. It was found that the incorporation of GQDs as an electron mediator promotes better photoelectrocatalytic hydrogen performance in comparison to the RGO. The addition of GQD can significantly improve the activity by 25.2 and 75.7% in comparison to the BiVO/RGO/g-CN and binary composite samples, respectively. Correspondingly, the BiVO/GQD/g-CN attained the highest photocurrent density of 19.2 mA/cm with an ABPE of 0.57% without the presence of any sacrificial reagents. This enhancement is stemming from the low photocharge carrier transfer resistance which was further verified via DFT study. The DFT analysis revealed that the BiVO/GQD/g-CN sample shared their electronic cloud density through orbital hybridization while the BiVO/RGO/g-CN sample show less mutual sharing. Additionally, the charge redistribution of the GQDs-composite at the heterostructure interface articulates a more stable and stronger heterojunction than the RGO-composite. Notably, this study provides new insights on the effect of different carbonaceous materials (RGO and GQDs) which are often used as an electron mediator to enhance photocatalytic activity.
在此,我们对用还原氧化石墨烯(RGO)或石墨烯量子点(GQDs)修饰的BiVO/g-CN的光电催化产氢进行了全面分析。从理论密度泛函理论(DFT)分析和实验验证的角度首次揭示了RGO和GQDs作为电子介质的差异。研究发现,与RGO相比,引入GQDs作为电子介质可促进更好的光电催化产氢性能。与BiVO/RGO/g-CN和二元复合样品相比,添加GQD分别可使活性显著提高25.2%和75.7%。相应地,在不存在任何牺牲试剂的情况下,BiVO/GQD/g-CN获得了最高光电流密度19.2 mA/cm²,表观量子效率(ABPE)为0.57%。这种增强源于低光电荷载流子转移电阻,这通过DFT研究得到了进一步验证。DFT分析表明,BiVO/GQD/g-CN样品通过轨道杂化共享其电子云密度,而BiVO/RGO/g-CN样品的相互共享较少。此外,GQDs复合材料在异质结构界面处的电荷重新分布表明其异质结比RGO复合材料更稳定、更强。值得注意的是,本研究为不同碳质材料(RGO和GQDs)作为电子介质增强光催化活性的作用提供了新的见解。